We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
3 gallon stainless steel vacuum chamber with tempered glass lid

VEVOR

VEVOR T3 3 Gallon Vacuum Chamber 304 Stainless Steel

SKU CH-5G63-SPSD9

A 3-gallon stainless-steel vacuum chamber with tempered glass lid reaches -29 inHg for degassing resin, silicone and stabilising wood

  • TypeOther Appliances
  • Width11.61
  • Large 3-gallon capacity handles bigger degassing projects
  • 304 stainless steel body resists corrosion from splashed liquids
  • Tempered glass lid with gasket maintains 24-hour airtight seal
  • Vacuum reaches -29 inHg for thorough bubble removal
  • Includes silicone pad, hose, filters and gauge for immediate use

3 Gallon Vacuum Chamber

The VEVOR T3 provides a 3 gallon interior for degassing resin, silicone, polyurethane and stabilising wood. Its 304 stainless steel body resists corrosion from liquid splashes during vacuum cycles. The tempered glass lid lets you monitor the process without opening the chamber. This unit suits hobbyists and small workshops needing reliable bubble removal.

Upgraded Seal and Valve

The lid uses a sealing gasket with a silicone cover and threaded valve connections for improved airtightness. Rubber gaskets at the gauge points help the system reach -29inHg vacuum. Testing shows a leak rate of approximately 5 percent over 12 hours, supporting a 24 hour hold. Builders replacing chambers with loose fittings or cracked acrylic lids will see the benefit immediately.

Simple Bench Setup

The package includes a vacuum gauge assembly, a 7.9 inch silicone pad, a 1/4 inch SAE female rubber hose and two air filter elements. Connect the hose to your pump, place the pad inside and you are ready to degas. The stainless steel chamber weighs 10.8 lbs so it stays put on a bench. Ensure your pump can pull the required vacuum level; the chamber itself has no electric components.

Highlights

  • Large 3-gallon capacity handles bigger degassing projects
  • 304 stainless steel body resists corrosion from splashed liquids
  • Tempered glass lid with gasket maintains 24-hour airtight seal
  • Vacuum reaches -29 inHg for thorough bubble removal
  • Includes silicone pad, hose, filters and gauge for immediate use

Specifications

TypeOther Appliances
Width11.61

Questions about this item

What bench space does the 230 × 270 mm stainless-steel chamber need?

The unit measures 9.1 × 10.6 inches and weighs 10.8 lbs, so allow a flat, level surface at least that large plus room for the vacuum pump hose connection.

Which fittings must be tightened to stop the 5 % leak rate over 12 hours?

Fit the vacuum gauge assembly using the rubber gaskets supplied, thread the valve connections fully, seat the silicone seal cover on the glass lid gasket, and check the 1/4" SAE hose for firm engagement before pulling vacuum.

When should the two air filter elements and the 7.9 inch silicone pad be replaced?

Swap filters when they appear clogged or discoloured and replace the pad if it becomes torn or permanently deformed, as both protect the chamber and pump from debris and resin spills.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.