We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four black metal hairpin table legs with square mounting plates and rubber feet

VEVOR

VEVOR T10569-28 28" Hairpin Table Legs 4PCS Black

SKU CH-8XHG-EK5AM

Four black carbon-steel hairpin legs raise a nightstand, coffee table or desk to 28 inches with a 500 lb capacity

  • TypeOther Appliances
  • Width6.69
  • 28-inch height suits standard desk and table builds
  • 500 lbs load capacity from carbon-steel 12.7 mm rods
  • 110 mm square mounting plate gives stable attachment
  • Rubber floor pads protect surfaces and reduce noise
  • Kit includes four legs, 22 screws and manual

28" Hairpin Table Legs, 4PCS Black

These carbon-steel hairpin legs measure 28 inches high and come as a set of four. Each leg has a 4.3 by 4.3 inch mounting plate with 6 mm holes and includes self-tapping screws for quick assembly. The set suits DIY builders making nightstands, coffee tables or desks.

Upgrading from lighter legs

The 500 lb load capacity and 3 mm steel thickness replace thinner rods that flex under heavy tops. The jump is worth it when the tabletop material is solid wood, stone or a thick slab that demands rigid support without wobble.

500 lb capacity and 12.7 mm cross-section

The 1/2 inch cross-section handles dense hardwood tops and heavy workshop loads without bending. It runs out when the design requires adjustable height, integrated levelers or a finish other than the supplied black powder coat.

Highlights

  • 28-inch height suits standard desk and table builds
  • 500 lbs load capacity from carbon-steel 12.7 mm rods
  • 110 mm square mounting plate gives stable attachment
  • Rubber floor pads protect surfaces and reduce noise
  • Kit includes four legs, 22 screws and manual

Specifications

TypeOther Appliances
Width6.69

Questions about this item

What size mounting plate do the 28 inch legs use?

Each leg has a 4.3 x 4.3 inch plate with 0.24 inch holes for the included ST3.5 x 30 mm screws.

Which step do people miss when fitting the ST3.5 x 30 mm screws?

Drill 6 mm pilot holes through the 4.3 inch plate first; driving the self-tapping screws straight in can split the tabletop.

When should the rubber floor pads be replaced?

Swap the pads once they flatten or crack, usually after heavy daily use, to keep the 500 lb rating and protect floors.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.