VEVOR
VEVOR SXYQCPBBCP10X20 10 x 20 ft outdoor storage building replacement canopy cover
Replacement side canopy cover for 10 x 20 ft frames, made from heavy-duty PE woven fabric with waterproof and UV50+ protection, includes 40 ball bungees for tool-free installation
- TypeOther Appliances
- Fits 10 x 20 ft frames for direct replacement
- PE woven 16×16 weave with double heat-sealed seams resists wear
- PU+UV coating on both sides blocks UV50+ rays
- 40 ball bungees and Velcro enable tool-free fitting
- 6 lb white cover ships with 40 grommets and manual
Replacement Canopy for 10 x 20 ft Frames
This PE woven fabric cover is built to replace the side canopy on existing 10 x 20 ft garage shelters. It includes only the fabric and 40 ball bungees; the metal frame is not supplied. The 16x16 weave with double-layer heat-sealed seams is intended for owners who need a fresh weather barrier without buying a whole new structure.
Waterproof PU Coating and UV50+ Protection
Both sides carry a PU coating rated to UV50+ so the material resists sun degradation and heavy rain. The white finish reflects heat, while reinforced square blocks and cross-stitched Velcro edges strengthen high-stress points. No power or moving parts are involved, so there is no operational noise or energy draw to consider.
Tool-Free Attachment with 40 Aluminium Grommets
Forty aluminium eyelets run the perimeter, each accepting a supplied elastic ball bungee for quick fastening to the frame. Velcro strips on the side panels add secondary hold without screws or bolts. The package weighs 14.6 lbs and packs flat, freeing up storage space until the next season. Buyers who need a complete frame or a solid roof panel will need a different product.
Highlights
- Fits 10 x 20 ft frames for direct replacement
- PE woven 16×16 weave with double heat-sealed seams resists wear
- PU+UV coating on both sides blocks UV50+ rays
- 40 ball bungees and Velcro enable tool-free fitting
- 6 lb white cover ships with 40 grommets and manual
Specifications
| Type | Other Appliances |
|---|
Questions about this item
How do I install the replacement canopy on a 10 x 20 ft frame using the ball bungees?
Thread each of the 40 ball bungees through the aluminum grommets around the perimeter and hook them onto the frame tubes; the Velcro strips on the side panels then secure the vertical edges.
What upkeep will the PE woven fabric with PU coating require over time?
Rinse the cover periodically with mild soap and water to remove dirt that can degrade the UV50+ coating, and inspect the 16x16 weave seams each season for abrasion.
At what wind or snow load does the 14.6 lb canopy typically show stress first?
The 16x16 weave and heat-sealed seams handle moderate loads, but sustained heavy snow accumulation or gusts above the frame's rating will strain the grommet points before the fabric itself fails.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
