We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White-grey powder-coated steel enclosure with hinged door, rain hood and mounting lugs

VEVOR

VEVOR ST6630 NEMA 4 IP65 Electrical Enclosure 24x24x12 in

SKU CH-DAN4-59FAP MPN ST6630

A NEMA 4 and IP65 rated steel junction box with a rain hood, lockable hinged door, and galvanized mounting plate for indoor or outdoor electrical equipment

  • TypeOther Appliances
  • Width15.94
  • IP65 & NEMA 4 rating shields components from water and dust
  • Cold-rolled carbon steel body with welded seams resists impact and corrosion
  • IK10 impact protection withstands heavy mechanical stress
  • Detachable galvanized backplate simplifies component mounting
  • Rain hood and seamless foam gasket prevent ingress when door is open

NEMA 4 IP65 steel enclosure

The VEVOR ST6630 is a cold-rolled carbon steel junction box rated NEMA Type 4 and IP65 for indoor or outdoor use. It measures 24 x 24 x 12 inches externally and provides a sealed, continuously welded cabinet for electrical components.

Installers needing IK10 impact protection

The enclosure suits projects that require a lockable hinged door, a galvanised mounting backplate and an operating range of -40 to 122 °F. It is not intended for applications that need a higher NEMA rating, a different enclosure size or a non-metallic body.

IP65 and IK10 ratings with 0.06 in steel walls

The single specification that decides fit is the combined NEMA 4, IP65 and IK10 protection on 0.06 inch thick cold-rolled carbon steel. If your environment demands this protection level and these dimensions, the ST6630 matches the requirement.

Highlights

  • IP65 & NEMA 4 rating shields components from water and dust
  • Cold-rolled carbon steel body with welded seams resists impact and corrosion
  • IK10 impact protection withstands heavy mechanical stress
  • Detachable galvanized backplate simplifies component mounting
  • Rain hood and seamless foam gasket prevent ingress when door is open

Specifications

TypeOther Appliances
Width15.94

Questions about this item

What does the IP65 rating actually protect against once the enclosure is mounted outside?

The IP65 rating means the enclosure is dust-tight and protected against low-pressure water jets from any direction, so rain, splashing water and airborne dust cannot enter when the door is closed and the gasket is seated.

How does the NEMA Type 4 rating limit what can be installed inside compared with other NEMA types?

NEMA Type 4 certifies the box for indoor or outdoor use against windblown dust, rain, splashing water and hose-directed water; it does not protect against submersion or corrosive atmospheres, so components must be rated for the same environment.

What wall-mounting hardware is required for the 0.35 in mounting holes on the 24 x 24 in enclosure?

The four mounting holes accept 0.35 in diameter fasteners; use bolts or lag screws of that size with washers, anchored into the mounting surface, and the included hanging lugs can be bolted to the same holes for extra support.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.