We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
A silver and black 12 inch sliding compound miter saw with an LED guide light and aluminum base on a benchtop

VEVOR

VEVOR Sliding Compound Miter Saw 12 in 15 A 60T Double Bevel LED

SKU CH-JKRY-QTVXX

Sliding compound miter saw with 12 in blade, 15 A motor and 60-tooth blade cuts 13.39 in wide at 5000 RPM, LED guide and dual 0-45° bevel

  • TypeOther Appliances
  • Width23.23
  • LED guide projects clear cut lines for flawless accuracy
  • Axial slide enables 13.39 in crosscuts and wall-hugging placement
  • Aluminum base cuts weight to 41.9 lb while dissipating heat
  • Dual bevel tilts 0-45° left and right for versatile angles
  • 15 A motor delivers 5000 RPM no-load speed through 60-tooth 12 in blade

Precision Cuts for Woodworkers

The VEVOR sliding compound miter saw uses a 12 in blade driven by a 15 A motor to deliver clean crosscuts in wood, composite decking and laminates. An integrated LED projects a precise cutting line while the dual bevel adjusts from 0° to 45° left and right. The axial sliding system extends the maximum cutting width to 13.39 in for wider stock.

Upgrade from Fixed or Single-Bevel Saws

Builders moving from a non-sliding miter saw gain the 340 mm crosscut capacity needed for broader boards without flipping the workpiece. The double bevel eliminates the need to flip the saw head for opposite-angle cuts, saving setup time on crown moulding and trim. The 5000 RPM no-load speed handles hardwoods and dense composites efficiently.

Portable Aluminium Base with Wall-Friendly Slide

The cast aluminium base weighs 41.9 lb, making the saw easier to move between job sites than heavier cast-iron models. Because the sliding rails extend forward only, the unit can sit flush against a wall to conserve bench space. Secure the workpiece firmly and verify the 60-tooth blade is tight before starting; the 2500 W straight-cut and 3000 W bevel-cut ratings demand a stable power supply.

Highlights

  • LED guide projects clear cut lines for flawless accuracy
  • Axial slide enables 13.39 in crosscuts and wall-hugging placement
  • Aluminum base cuts weight to 41.9 lb while dissipating heat
  • Dual bevel tilts 0-45° left and right for versatile angles
  • 15 A motor delivers 5000 RPM no-load speed through 60-tooth 12 in blade

Specifications

TypeOther Appliances
Width23.23

Questions about this item

What bench space does the 33.46 in long by 22.44 in wide saw require?

The saw measures 33.46 in long by 22.44 in wide by 29.92 in high and weighs 41.9 lb, so allow at least that footprint plus room for the sliding head to travel

How do I set the bevel angle correctly on the double-bevel saw?

Unlock the bevel handle, tilt the blade to the desired angle between 0° and 45° left or right using the scale, then lock the handle securely before cutting

When should the 60-tooth 12 in blade be replaced?

Replace the 60-tooth 305 mm blade when teeth are chipped, cutting becomes rough, or the blade shows visible warping or missing carbide tips

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.