We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Stainless steel single-tap beer tower with regulator and coupler

VEVOR

VEVOR Single Tap Kegerator Tower Kit D-System CGA320 Regulator Stainless Steel

SKU CH-5BDC-3JWM9

Stainless-steel single-tap tower kit with D-system coupler, CGA320 dual-gauge regulator and 5 ft beer line for keg conversion

  • TypeOther Appliances
  • Width7.87
  • 304 stainless steel tower resists corrosion for long-lasting use
  • Dual-gauge CGA320 regulator shows output pressure and tank volume at a glance
  • D-System coupler fits most American Sankey kegs with chrome-plated brass body
  • Complete kit includes 5 ft beer line, wrench, brush, faucet cover and all mounting hardware
  • Compact 175 × 115 × 435 mm footprint suits home bars and commercial kegerators

Single-Tap Kegerator Kit

This single-tap kegerator tower kit converts a compatible refrigerator into a draft-beer dispenser for home or commercial bars. It includes a 304 stainless steel beer tower, a D-System keg coupler, a dual-gauge CGA320 regulator, 5 ft of beer tubing and all mounting hardware. The kit suits users who want one faucet for standard American Sankey kegs.

Installation Notes

Mounting uses four long and four short screws with supplied gaskets and nuts; a tap wrench is provided for faucet tightening. The spring-loaded self-closing faucet and tower gasket help seal the installation. Common issues include leaks at hose-clamp connections if clamps are not fully seated, and regulator adjustment confusion before the output pressure stabilises on the top gauge.

Capacity and Limits

The D-System coupler fits most American D-System Sankey kegs, so the kit handles standard half-barrel, quarter-barrel and sixth-barrel sizes. It does not support European S-System, A-System or M-System kegs without a different coupler. The single faucet serves one beer at a time; venues needing simultaneous pours will require additional towers and couplers.

Highlights

  • 304 stainless steel tower resists corrosion for long-lasting use
  • Dual-gauge CGA320 regulator shows output pressure and tank volume at a glance
  • D-System coupler fits most American Sankey kegs with chrome-plated brass body
  • Complete kit includes 5 ft beer line, wrench, brush, faucet cover and all mounting hardware
  • Compact 175 × 115 × 435 mm footprint suits home bars and commercial kegerators

Specifications

TypeOther Appliances
Width7.87

Questions about this item

How do I verify the CGA320 regulator is working correctly after installation?

Check the top gauge for stable output pressure and the side gauge for remaining tank volume; both should hold steady at your set pressure without creeping when the tap is closed.

What components come in the box and what must I supply separately?

The kit includes the 304 stainless steel tower, faucet, spring, gasket, screws, nuts, cover, brush, wrench, three hose clamps, CGA320 regulator, D-System coupler and 5 ft beer hose; you must provide a CO₂ cylinder with a CGA320 inlet and a compatible keg.

Which keg coupler type should I choose for standard American Sankey kegs?

The included D-System coupler is built for most American D-System Sankey kegs, so select this version when serving those kegs.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.