We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Cast steel single horn anvil, dark finish, flat face with square and round holes, rounded horn, wide stable base

VEVOR

VEVOR Single Horn Anvil 55lbs Cast Steel GZJ55

SKU CH-CWPE-QGF5A

A 55 lb cast steel single-horn anvil heat-treated to 50 HRC with a rebound rate over 70% for efficient forging

  • TypeOther Appliances
  • Width9.45
  • Cast steel construction resists deformation for long-term use
  • Heat-treated surface reaches 50 HRC for impact resistance and corrosion protection
  • Rebound rate above 70% returns metal to shape quickly, improving forging efficiency
  • Cutting table and thick base add stability and prevent unwanted dents
  • Precision pritchel hole 10 mm and square hole 20 x 20 mm expand metalworking options

Single Horn Anvil 55 lbs

The VEVOR GZJ55 is a cast steel anvil weighing 55 lb (25 kg) with a single round horn for blacksmithing, metal bending, shaping and twisting. A heat-treated surface reaches 50 HRC for impact resistance and corrosion protection. The 9.45 in width and thick base provide a stable countertop for forging work.

Forging Limits

Cast steel construction delivers a rebound rate greater than 70% so the face returns quickly after each strike. The 800 heat treatment hardens the surface to 50 HRC, reducing deformation during heavy hammering. Precision-cut pritchel and square holes support punching and tool holding without cracking the surrounding material.

55 lb Weight Decides Fit

At 55 lb the anvil suits hobbyists and light production work where a heavier shop anvil would be impractical. Buyers needing higher mass for large-scale industrial forging or continuous heavy striking should consider heavier models. The single horn design also limits simultaneous multi-axis bending compared to double-horn patterns.

Highlights

  • Cast steel construction resists deformation for long-term use
  • Heat-treated surface reaches 50 HRC for impact resistance and corrosion protection
  • Rebound rate above 70% returns metal to shape quickly, improving forging efficiency
  • Cutting table and thick base add stability and prevent unwanted dents
  • Precision pritchel hole 10 mm and square hole 20 x 20 mm expand metalworking options

Specifications

TypeOther Appliances
Width9.45

Questions about this item

Which capacity of the VEVOR GZJ55 anvil should I choose for general blacksmithing?

The GZJ55 is offered in a single 55 lb (25 kg) size, providing a stable mass for bending, shaping and twisting without needing to compare multiple capacities.

What does the 50 HRC hardness mean when I am forging on this anvil?

Heat-treated to 50 HRC at 800 °C, the cast steel face resists denting and deformation, while the 70 % rebound returns energy to the workpiece for efficient forging.

What are the pritchel and hardy hole sizes, and what tooling do they accept?

A 0.4 in (10 mm) round pritchel hole and a 0.8 x 0.8 in (20 x 20 mm) square hardy hole accommodate standard blacksmith tooling for punching and holding accessories.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.