We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black cast steel anvil with single horn, round and square holes, rectangular base

VEVOR

VEVOR Single Horn Anvil 22Lbs Cast Steel 50HRC

SKU CH-ZMHE-5YMSP

A 22 lbs cast steel anvil with a 50HRC hardened face, 70% rebound, and round plus square holes for bending, punching and shaping metal

  • TypeOther Appliances
  • Width6.1
  • Cast steel construction delivers lasting strength through 800°C heat treatment to 50HRC
  • Over 70% rebound rate returns energy fast for efficient forging sessions
  • Round and square holes enable bending, punching and fitting in one tool
  • 260 x 82 mm work surface gives ample room for varied metal projects
  • 22 lb mass on 360 x 80 x 110 mm base stays planted under heavy blows

Built for Metalwork

This single-horn anvil is made from cast steel that has been heat-treated at 800°C to reach 50HRC hardness. The 22.05 lb weight and 14.17 x 3.15 x 4.33 inch footprint give it a stable presence on a benchtop. It is suited to blacksmiths, metalsmiths and hobbyists who need a durable surface for bending, shaping and punching metal.

Consistent Rebound Under Load

The work face measures 10.24 x 3.23 inches and delivers a rebound rate above 70 percent, so the surface returns energy efficiently during extended forging sessions. Both the 3/8 inch pritchel hole and the 5/8 inch square hole are machined for clean bending, fitting and punching without contaminating the workpiece.

Stable, Quiet Operation

With a net weight of 22.05 lbs and a base footprint of 360 x 80 x 110 mm, the anvil resists movement without extra clamping, though bolt holes are provided for permanent mounting. The unpainted cast steel face produces no coating debris and runs silently, drawing no power and generating no heat beyond the workpiece itself.

Highlights

  • Cast steel construction delivers lasting strength through 800°C heat treatment to 50HRC
  • Over 70% rebound rate returns energy fast for efficient forging sessions
  • Round and square holes enable bending, punching and fitting in one tool
  • 260 x 82 mm work surface gives ample room for varied metal projects
  • 22 lb mass on 360 x 80 x 110 mm base stays planted under heavy blows

Specifications

TypeOther Appliances
Width6.1

Questions about this item

How much noise, heat or power does the 22 lb cast steel anvil generate when used all day?

The anvil produces only the sound of hammer strikes and no heat or power draw, as it has no motor or electrical components.

What must I already own to mount and use the 10.24 x 3.23 inch work surface?

You need a sturdy workbench and either clamps or bolts to secure the base, which measures 14.17 x 3.15 inches.

Will the 50 HRC hardened face and 3/8 inch pritchel hole work with my older blacksmith tongs and punches?

Yes, the 50 HRC surface resists wear from traditional tools, and the 3/8 inch pritchel plus 5/8 inch hardy hole accept standard punches and tooling.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.