We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow cylindrical ventilator with flexible duct hose coiled beside it

VEVOR

VEVOR SHT-25 10 inch Portable Ventilator Yellow 33ft Duct

SKU CH-M399-X4RGB

A portable 10 inch axial blower with two speed settings delivering up to 1948 CFM, IP44 rated housing, overheat protection, and a 33 ft flexible duct for confined space ventilation

  • TypeOther Appliances
  • Width13.39
  • High airflow up to 1948 CFM clears large spaces fast
  • Two speed settings with 292W high and 223W low match ventilation needs
  • 8 ft flexible duct reaches confined areas from outside
  • IP44 waterproof rating protects motor in damp conditions
  • Overheat protection shuts down unit to prevent damage

Portable Ventilator for Confined Spaces

The VEVOR SHT-25 is a 10 inch portable ventilator designed for basements, workshops, warehouses and confined spaces. It operates on AC 110V 60Hz power with a yellow carbon steel housing and aluminum impeller. Two speed settings deliver high airflow of 1948 CFM at 292W or low airflow of 1394 CFM at 223W.

Duct Length and Weather Protection Limits

The included flexible duct hose extends 32.8 ft to reach ventilation points, but longer runs will reduce the stated airflow figures. An IP44 rating protects the motor from splashing water, yet the unit is not rated for immersion or sustained heavy rain. Overheat protection shuts the fan down if internal temperatures exceed safe limits.

Simple Setup with Weight and Duct Handling

The ventilator weighs 25.2 lbs with accessories, so one person can lift it into position, though the 32.8 ft duct requires space to uncoil without kinks. Connection is a direct plug into a 110V outlet with no wiring required. The main installation issues are duct kinks that restrict flow and placing the intake too close to the exhaust, which recirculates stale air.

Highlights

  • High airflow up to 1948 CFM clears large spaces fast
  • Two speed settings with 292W high and 223W low match ventilation needs
  • 8 ft flexible duct reaches confined areas from outside
  • IP44 waterproof rating protects motor in damp conditions
  • Overheat protection shuts down unit to prevent damage

Specifications

TypeOther Appliances
Width13.39

Questions about this item

Should I run the SHT-25 on high or low speed for a typical workshop?

High speed delivers 1948 CFM at 292 W; low speed gives 1394 CFM at 223 W. Choose high when you need maximum air exchange, low for quieter, lower-power operation.

What does 1948 CFM actually move in a real basement?

At high speed the blower pushes 1948 cubic feet of air every minute through the 32.8 ft duct, enough to clear fumes or heat from a medium-sized basement in minutes.

How does the IP44 rating limit where I can place the fan?

IP44 protects against splashing water from any direction, so the unit can sit in damp workshops or covered outdoor areas but must not be submerged or hit by high-pressure jets.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.