VEVOR
VEVOR SGO-3009 Sliding Gate Opener 3100 lbs 43 ft/min 500W 110V AC 2 Remotes
Moves gates up to 3100 lbs at 43 ft/min using a 500 W 110 V AC motor with two remotes and magnetic limits
- TypeOther Appliances
- Opens heavy gates up to 3100 lbs with 500 W motor
- Moves gate at 43 ft/min for quick entry and exit
- Controls gate from 100 ft away with two included remotes
- Operates reliably from -4 °F to 122 °F in dust and rain
- Manual release keys allow operation during power failure
Heavy-Duty Sliding Gate Opener
The VEVOR SGO-3009 is a 500W AC motor kit built to move gates weighing up to 3100 lbs at 43 ft per minute. It runs on 110V AC power and includes two 433.92 MHz remote controls with a 100 ft range. The unit features a magnetic limit switch, adjustable thrust, and a thermal protector. A 9-inch base height keeps the motor above standing water during heavy rain.
Upgrade From Manual Or Light-Duty Operators
This opener replaces hand-pushed gates or under-powered motors that stall on heavy leaves. The jump is worth it when your gate exceeds the weight or length limits of residential operators, or when you need the 15-minute duty cycle for frequent daily cycles. The 20 ft chain kit covers spans up to 39.4 ft and can be split into two 10 ft sections. Two manual release keys provide mechanical override during power loss.
Capacity And Operational Limits
The motor comfortably handles gates up to 3100 lbs and 39.4 ft long at 13 m per minute with 25 N.m of torque. It supports up to 40 programmed remotes in single-button mode and auto-closes after 5, 10, or 20 seconds. The S2 duty cycle limits continuous run time to 15 minutes, so very high-traffic sites may exceed its thermal headroom. Operating range spans -4°F to 122°F.
Highlights
- Opens heavy gates up to 3100 lbs with 500 W motor
- Moves gate at 43 ft/min for quick entry and exit
- Controls gate from 100 ft away with two included remotes
- Operates reliably from -4 °F to 122 °F in dust and rain
- Manual release keys allow operation during power failure
Specifications
| Type | Other Appliances |
|---|
Questions about this item
What mounting footprint and shaft height does the SGO-3009 need?
The unit measures 12.6 x 6.18 x 22.5 in and the output shaft sits 2.3 in above the base, so the concrete pad must accommodate that footprint and height.
How do I install the 20 ft chain and set the magnetic limits, and what step is often missed?
Split the 20 ft chain into two 10 ft sections if needed, bolt the opener to the pad, connect the chain to the gate bracket, then position the magnetic limit switches on the chain; the step often missed is setting both open and close magnets before the first power-on test.
Which consumables will need replacement on the SGO-3009 over time?
The two remote controls use replaceable batteries (not included), the 20 ft chain will wear and may need retensioning or replacement, and the magnetic limit switches can be swapped if damaged.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
