We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four new aluminum screen printing frames 20 by 24 inches with white mesh and sealing tape

VEVOR

VEVOR Screen Printing Kit 4 Frames 20x24in 355 Mesh

SKU CH-TN6H-X4ES4

Kit includes four 20×24 inch aluminum frames with 355-count polyester mesh and sealing tape for T-shirt printing

  • TypeOther Appliances
  • Width20.87
  • Four frames give multiple designs ready at once
  • 355 mesh count suits fine-detail artwork
  • 15 N tension keeps mesh taut for clean ink transfer
  • Laser-welded aluminium alloy resists warping during repeated use
  • 20 x 24 in frame area fits large-format prints

4-Frame 355 Mesh Kit

This VEVOR screen printing kit includes four aluminum alloy frames sized 20 x 24 inches with 355-count polyester mesh. Each frame measures 0.8 inches thick and uses laser-welded construction for structural stability. The set ships with sealing tape and weighs 5.2 lbs total, aimed at DIY textile printing on T-shirts and similar flat substrates.

Check Frame Fit and Mesh Count

Verify your exposure unit or workspace can accommodate the 20.87-inch frame width and 24.8 x 20.4 x 4.5 inch package dimensions. The 355 mesh count suits fine-detail work with thinner inks; confirm your ink viscosity and design resolution match this specification. Ensure you have a compatible emulsion and washout setup for polyester mesh before ordering.

Sustained Use and Mesh Tension

The frames maintain 15±0.5 N mesh tension through repeated print cycles, resisting deformation from squeegee pressure. Bi-component adhesive bonds the mesh to the aluminum alloy to prevent edge lifting or ink leakage during long runs. Surface scratches from post-weld polishing do not affect tension retention or print consistency over extended sessions.

Highlights

  • Four frames give multiple designs ready at once
  • 355 mesh count suits fine-detail artwork
  • 15 N tension keeps mesh taut for clean ink transfer
  • Laser-welded aluminium alloy resists warping during repeated use
  • 20 x 24 in frame area fits large-format prints

Specifications

TypeOther Appliances
Width20.87

Questions about this item

What comes in the box and what must I buy separately to start printing?

The kit includes four 20 x 24 in aluminum alloy frames pre-stretched with 355-count polyester mesh and one roll of sealing tape. You will need to supply emulsion, a squeegee, ink and an exposure source yourself.

The kit only lists 355 mesh — how do I know if that count suits my artwork?

A 355-count mesh deposits a fine layer of ink, making it suitable for detailed graphics and halftones on fabric; choose a lower count only if you need heavier ink deposits for specialty inks.

The frames are laser-welded with 15±0.5 N mesh tension — what does that mean for daily use?

The welded corners resist warping and the consistent high tension keeps the mesh tight so registration stays accurate over repeated print runs.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.