We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Stainless steel sauna heater with external controller, wall-mount bracket visible

VEVOR

VEVOR SCA-90BW 9kW 240V Sauna Heater with Pre-Drilled Bracket

SKU CH-D68Z-Q2BW7

9 kW 240 V electric sauna stove with pre-drilled bracket for rooms from 317.8 to 459 cu.ft

  • TypeOther Appliances
  • Width13.19
  • Heats rooms from 317.8 to 459 cu.ft with 9 kW power
  • 304 stainless steel body resists corrosion in humid sauna environments
  • External controller with clear display simplifies temperature adjustments
  • Pre-drilled bracket and included hardware enable straightforward wall mounting
  • Requires 10 to 15 kg sauna stones for optimal heat storage

Sauna Heater 9 kW 240 V

The VEVOR SCA-90BW is a 9 kW electric sauna stove operating at 240 V. It is built for home, commercial and leisure venues that need a dry steam bath heater with a pre-drilled mounting bracket. A 304 stainless steel body and heating element provide corrosion resistance in humid environments. An external controller with display is included for temperature management.

Room volume 317.8 to 459 cu ft

This heater is rated for sauna rooms between 317.8 and 459 cubic feet (9 to 13 m³). The single specification that decides fit is the room volume; the 9 kW output matches this range. Buyers with smaller or larger rooms must choose a different output. Stones are required but not supplied.

Stone capacity 22 to 33 lbs

The stove holds 22 to 33 lbs (10 to 15 kg) of sauna stones for heat storage and even temperature distribution. This capacity comfortably handles sessions in the rated room volume. It runs out when the room exceeds 459 cu ft or when stone mass is insufficient for the desired heat retention.

Highlights

  • Heats rooms from 317.8 to 459 cu.ft with 9 kW power
  • 304 stainless steel body resists corrosion in humid sauna environments
  • External controller with clear display simplifies temperature adjustments
  • Pre-drilled bracket and included hardware enable straightforward wall mounting
  • Requires 10 to 15 kg sauna stones for optimal heat storage

Specifications

TypeOther Appliances
Width13.19

Questions about this item

What room volume does the 9 kW rating cover in a real installation?

The heater is rated for sauna rooms between 317.8 and 459 cubic feet, or roughly 9 to 13 cubic metres.

What does the 240 V supply limit in practice?

The unit requires a 240 V single-phase connection; the external controller and temperature sensor run from the same circuit.

What clearances and fixings are needed to mount the 410 × 270 × 570 mm stainless-steel body?

A pre-drilled bracket is included with M4 × 12 mm, M6 × 16 mm and M6 × 40 mm self-tapping screws for wall mounting.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.