We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rubber curb ramp with textured non-slip surface and grid-patterned underside, rectangular with sloped profile

VEVOR

VEVOR Rubber Curb Ramp 4.25" Rise 19.7" L 11.8" W 15T

SKU CH-VYQK-93KKT

Heavy-duty rubber curb ramp supports 15 tonnes and measures 50 × 30 × 10.8 cm for smooth vehicle and wheelchair access

  • TypeOther Appliances
  • Width12.99
  • Supports up to 15 tons for heavy vehicles
  • Natural rubber resists heat, wear and deformation
  • Textured surface prevents slipping in wet conditions
  • Bottom drainage grooves remove standing water
  • Includes two M8 expansion screws for secure mounting

Rubber Curb Ramp for Vehicles and Mobility

The VEVOR rubber curb ramp provides a 4.25 inch rise over a 19.7 inch length and 11.8 inch width. It supports cars, forklifts, trucks, buses, wheelchairs and bikes with a 15 ton bearing capacity. The grid-patterned base reinforces compression strength and shock absorption. It is not suited for buyers who need a modular system that can span wider kerbs or multiple connected sections.

Natural Rubber Construction and Surface Grip

Made from natural rubber, the ramp resists high temperatures, wear and deformation while emitting only a slight rubber odour. A textured top surface increases friction for wet or snowy conditions. Drainage grooves along the bottom prevent water pooling and odour build-up. It does not meet the needs of users who require a lightweight portable ramp for frequent relocation.

Fixed Installation with Expansion Screws

Two M8 by 10 expansion screws are included for permanent mounting to concrete or asphalt. The unit weighs 19.8 lbs and measures 50 by 30 by 10.8 cm, staying in place under repeated heavy loads. The single-piece design handles sustained traffic without shifting. It is not intended for buyers who want a temporary ramp that can be removed and stored daily.

Highlights

  • Supports up to 15 tons for heavy vehicles
  • Natural rubber resists heat, wear and deformation
  • Textured surface prevents slipping in wet conditions
  • Bottom drainage grooves remove standing water
  • Includes two M8 expansion screws for secure mounting

Specifications

TypeOther Appliances
Width12.99

Questions about this item

How do I install the VEVOR rubber curb ramp using the included M8*10 expansion screws?

Position the 19.7" L x 11.8" W ramp on a clean, level concrete or asphalt surface, mark the pre-drilled hole locations, drill pilot holes with a suitable masonry bit, insert the two supplied M8*10 expansion screws, and tighten securely so the 4.25" rise ramp sits flush and stable.

What ongoing maintenance does the rubber curb ramp require to keep its 15-ton load capacity?

Periodically sweep debris from the non-slip textured surface and bottom drainage grooves, check that the two M8*10 expansion screws remain tight, and inspect the natural rubber for cuts or permanent deformation after heavy forklift or truck traffic.

At what point does the 4.25" high rubber ramp show its limit during continuous heavy use?

The 33069 lbs / 15-ton rated capacity is the structural limit; sustained loads approaching this weight, especially from repeated forklift or bus crossings, will eventually cause permanent compression or tearing of the natural rubber material.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.