We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Orange and grey cylindrical steel recovery tank with brass Y-valve and two brass adapters

VEVOR

VEVOR Refrigerant Recovery Tank 50 lbs 400 psi Y-Valve Orange+Gray

SKU CH-18J9-RZHXJ

A 50 lb capacity refrigerant recovery cylinder rated at 400 psi working pressure with a brass Y-valve for liquid and vapor handling

  • Width11.61
  • Recovers R22, R134A and R410A refrigerants with one tank
  • Handles 400 psi working pressure for safe operation
  • Brass Y-valve recovers both liquid and vapour
  • Two brass adapters connect to 1/4" SAE and 1/2" ACME hoses
  • HP295 steel cylinder rated for five years of service

50 lb Capacity Recovery Tank

This 50 lb capacity refrigerant recovery tank is built for HVAC technicians handling R22, R134A and R410A. The cylinder is constructed from HP295 steel and pre-charged with nitrogen to resist internal corrosion. It ships with two brass adapters that convert the 1/4 inch SAE port to 1/2 inch ACME for broad hose compatibility.

400 psi Working Pressure & Sealing

The tank carries a 400 psi working pressure rating and has been tested to 800 psi for safety margin. An integral brass Y-valve controls both liquid and vapor flow while a pressure relief valve guards against over-pressurisation. The sealed design minimises leakage risk during routine recovery jobs.

Five Year Service Life Under Load

Rated for a five year service life, the cylinder operates reliably across a -50 to 122 Fahrenheit temperature range. Sustained high-pressure recovery cycles stay within the 2.7 MPa working limit without deformation. The 19.6 lb steel body maintains structural integrity during extended use on commercial and residential systems.

Highlights

  • Recovers R22, R134A and R410A refrigerants with one tank
  • Handles 400 psi working pressure for safe operation
  • Brass Y-valve recovers both liquid and vapour
  • Two brass adapters connect to 1/4" SAE and 1/2" ACME hoses
  • HP295 steel cylinder rated for five years of service

Specifications

Width11.61

Questions about this item

How do I connect the 1/4" SAE Y-valve to my recovery hoses?

The tank ships with two 1/4" SAE to 1/2" ACME brass adapters; thread them onto the Y-valve ports before attaching your hoses. The integral brass Y-valve handles both liquid and vapor flow through a single connection point.

When must the 50 lb recovery tank be requalified or replaced?

The manufacturer specifies a 5-year service life from the date of manufacture; after that period the cylinder must be retested or retired per DOT regulations.

What pressure limit triggers the relief valve during a long recovery job?

The tank is rated for a 400 psi working pressure with an 800 psi test pressure; the included pressure relief valve opens before the cylinder exceeds its design limit.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.