We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Cylindrical steel tank with brass Y-valve and float switch, grey finish

VEVOR

VEVOR Refrigerant Recovery Tank 30 lb Float Switch

SKU CH-9NMQ-V0T7T

A 30 lb refrigerant recovery tank with float switch that stops filling at 80% capacity, 400 psi working pressure, and 1/4 to 1/2 inch brass adapters

  • TypeOther Appliances
  • Width10.63
  • Automatic shut-off at 80 % capacity prevents overfill
  • Float switch suspends recovery so process needs no constant watching
  • 1/4" SAE valve plus two brass adapters fit most hose sizes
  • Integral brass Y-valve with pressure relief handles 400 psi working pressure
  • HP295 steel tank rated for 5-year service life

30 lb Recovery Tank with Float Switch

This VEVOR cylinder stores up to 30 lb of recovered refrigerant and suits HVAC technicians who need a reusable vessel for on-site jobs. The integral float switch stops the recovery machine automatically at the 80 % fill level, removing the need to watch the process constantly. It is built from HP295 steel rated for a 400 psi working pressure and an 800 psi test pressure.

Automatic Shut-off and Pressure Safety

The floating switch cuts power once the tank reaches roughly 80 % capacity, preventing overfill without operator attention. A brass Y-valve with strong sealing handles both liquid and vapour flow, while the included pressure relief valve vents excess pressure if the 400 psi working limit is approached. Operating temperature spans -50 °C to 122 °C.

Brass Adapters for Common Hose Sizes

Two 1/4" SAE to 1/2" ACME brass adapters ship in the box, letting the 1/4" SAE valve connect to most recovery hoses used on older residential air-conditioning systems. The tight thread engagement reduces leak risk during transfer. The tank carries a five-year rated service life under normal field conditions.

Highlights

  • Automatic shut-off at 80 % capacity prevents overfill
  • Float switch suspends recovery so process needs no constant watching
  • 1/4" SAE valve plus two brass adapters fit most hose sizes
  • Integral brass Y-valve with pressure relief handles 400 psi working pressure
  • HP295 steel tank rated for 5-year service life

Specifications

TypeOther Appliances
Width10.63

Questions about this item

How do I install the ¼ SAE to ½ ACME brass adapters onto the tank valve?

Thread the two brass adapters onto the built-in ¼ SAE valve by hand, then tighten with a wrench until the flare seats fully; the step most often missed is forgetting to torque the second adapter after the first.

What maintenance or replacement will the float switch need during the 5-year service life?

Inspect the float mechanism annually for debris and verify the 80 % auto-shutoff still triggers; the switch itself is not user-serviceable, so replace the entire tank if calibration drifts.

At what pressure does the relief valve open under sustained recovery?

The pressure relief valve is rated to open at the tank's test pressure of 800 psi / 5.5 MPa, which is the first hard limit reached during continuous filling.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.