We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Metallic rear drive shaft assembly, tubular form, silver finish

VEVOR

VEVOR Rear Prop Drive Shaft 2015-2019 Dodge Challenger V6 3.6L

SKU CH-CJRC-1VCS1

Rear prop drive shaft fits 2015-2019 Dodge Challenger V6 3.6L with Ø 2.4 in and Ø 3.0 in diameters

  • TypeOther Appliances
  • Width9.65
  • Designed for 2015-2019 Dodge Challenger V6 3.6L models
  • Dual-diameter shaft at 60 mm and 76 mm for correct fit
  • Weighs 13.4 kg including accessories for balanced handling
  • Length adjusts between 1820 mm and 1860 mm for installation flexibility
  • New condition with user manual supplied for immediate use

Vehicle Compatibility

This rear propeller drive shaft is built for 2015 to 2019 Dodge Challenger models equipped with the 3.6 litre V6 engine. It serves owners replacing a worn or damaged original shaft on these specific vehicles. Buyers with different model years, engine sizes or Challenger trims cannot use this part.

Build Quality and Installation

The assembly weighs 29.5 lbs with accessories included and measures between 71.7 and 73.2 inches in overall length. Shaft diameters are 2.4 inches and 3.0 inches at the respective ends. A single user manual is supplied in the package to guide the fitting process.

Pre-Purchase Checks

Confirm that your Challenger is a 2015 to 2019 model with the V6 3.6 litre powertrain before ordering. Verify the existing shaft length and both diameter measurements match the figures above. Builders needing a shaft for V8 models, all-wheel-drive variants or other vehicle platforms must source a different component.

Highlights

  • Designed for 2015-2019 Dodge Challenger V6 3.6L models
  • Dual-diameter shaft at 60 mm and 76 mm for correct fit
  • Weighs 13.4 kg including accessories for balanced handling
  • Length adjusts between 1820 mm and 1860 mm for installation flexibility
  • New condition with user manual supplied for immediate use

Specifications

TypeOther Appliances
Width9.65

Questions about this item

What diameter shaft does the 2.4-inch section fit?

The shaft measures Ø 2.4 in / 60 mm at one end and Ø 3.0 in / 76 mm at the other, matching the factory splines on the 2015-2019 Dodge Challenger V6 3.6L

What are the exact length limits for this drive shaft assembly?

Overall length spans 71.7 to 73.2 inches (1820-1860 mm) with a width of 8.5 inches (215 mm) and height of 4.3 inches (110 mm), so verify tunnel clearance before ordering

Which bolts must be torqued first during installation to avoid driveline vibration?

Install the shaft, align the reference marks on the flanges, then torque the flange bolts to specification before tightening any centre-bearing or bracket hardware to prevent misalignment

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.