We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Orange portable hydraulic rebar cutter in stainless carry box

VEVOR

VEVOR RC-20 1250W 110V Hydraulic Rebar Cutter 20mm

SKU CH-RNMB-621XB MPN RC-20

Cuts 4–20 mm rebar in 3.0–3.5 seconds with a 1250 W hydraulic motor, weighing 13 kg and supplied in a stainless storage box

  • TypeOther Appliances
  • Cuts rebar up to 20 mm in 3.0–3.5 seconds
  • 1250 W pure copper motor drives hydraulic pump for reliable power
  • Upgraded steel blades resist deformation for long service life
  • Weighs 13 kg and fits in a 480 × 195 × 285 mm carry case
  • CE and RoHS certified for construction and rescue use

Cutting capacity and target users

The VEVOR RC-20 is a portable electric hydraulic rebar cutter that handles round and screw-thread steel from 4 mm up to 20 mm diameter. It is built for construction crews and rescue teams who need to sever #3 through #6 rebar quickly on site without the sparks or fumes of abrasive cutting.

Thermals noise and power draw

A 1250 W pure-copper-coil motor drives the hydraulic pump at 110 V 60 Hz, delivering each cut in 3.0 to 3.5 seconds while running smoothly to keep friction and power consumption low. The hydraulic design produces minimal noise compared with impact or grinding tools, so operators can work longer without excessive fatigue or hearing strain.

Included accessories and their effect

The package supplies a stainless storage box measuring 480 x 195 x 285 mm, an accessories bag, a bottle of 46# hydraulic oil, three Allen wrenches, two standard wrenches and a user manual. The box protects the 13 kg cutter during transport, the oil ensures the hydraulic circuit is ready for immediate use and the wrenches allow blade changes or routine maintenance without hunting for tools.

Highlights

  • Cuts rebar up to 20 mm in 3.0–3.5 seconds
  • 1250 W pure copper motor drives hydraulic pump for reliable power
  • Upgraded steel blades resist deformation for long service life
  • Weighs 13 kg and fits in a 480 × 195 × 285 mm carry case
  • CE and RoHS certified for construction and rescue use

Specifications

TypeOther Appliances

Questions about this item

How do I install the cutter so it runs on 110V 60 Hz power?

Plug the unit into a grounded 110V 60 Hz outlet, check the hydraulic oil level using the supplied 46# bottle, and tighten the blade bolts with the included Allen wrenches before the first cut.

What maintenance will the hydraulic system and blades need over time?

Replace the 46# hydraulic oil when it darkens or after heavy use, and inspect the upgraded steel blades for deformation; the multiple screw fixed head lets you swap blades with the supplied wrenches.

What limits continuous cutting on 20 mm rebar?

The 1250W pure copper motor and hydraulic pump heat up during sustained cuts at the 3.0-3.5 second cycle, so allow cool-down periods to protect the motor windings and seals.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.