We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ratcheting tube bender with seven dies in plastic case

VEVOR

VEVOR Ratcheting Tube Bender 1/4"-7/8" with 7 Dies

SKU CH-5YY0-V3TFV

Bends 1/4" to 7/8" soft copper and aluminium tubing to 90° in forward or reverse with a mechanical ratchet, and includes seven dies, a pipe cutter, deburring tool and storage box

  • TypeOther Appliances
  • Width13.39
  • Bends soft copper and aluminium pipes up to 90°
  • Reverse bending attachment reaches tight spots with mechanical ratchet
  • Seven interchangeable dies cover 1/4" to 7/8" outer diameters
  • Cast iron and aluminium alloy head prevents pipe deformation
  • Includes pipe cutter, deburring tool and storage box

Versatile Ratcheting Tube Bender

The VEVOR ratcheting tube bender handles soft copper and aluminium pipes from 1/4 inch to 7/8 inch outer diameter. Seven interchangeable dies cover the full range for plumbing, floor heating, refrigeration and air-conditioning work. A mechanical ratchet and reverse-bending attachment let you form 90-degree bends in tight spots. The kit also includes a bearing-type cutter, deburring tool and reamer for complete on-site preparation.

Capacity and Headroom

Wall thickness from 0.02 to 0.05 inch is supported, so standard HVAC and refrigeration tubing bends cleanly without collapse. The ratchet mechanism gives fast, repeatable leverage up to the 90-degree limit, but harder alloys or thicker walls will exceed the tool's design range. Dies are fixed to the listed sizes, so non-standard diameters cannot be accommodated. The included cutter and reamer handle the same diameter span, keeping the workflow self-contained.

Build and Daily Use

Cast-iron frame with aluminium-alloy bending head resists deformation under load. The whole set weighs 10.7 lb and packs into a 17.7 by 13.0 by 3.0 inch plastic box for transport between jobs. Dies swap quickly on the head, and the reverse attachment threads on for awkward angles without repositioning the pipe. No hydraulic pump or external power is needed, so the tool works anywhere there is hand clearance.

Highlights

  • Bends soft copper and aluminium pipes up to 90°
  • Reverse bending attachment reaches tight spots with mechanical ratchet
  • Seven interchangeable dies cover 1/4" to 7/8" outer diameters
  • Cast iron and aluminium alloy head prevents pipe deformation
  • Includes pipe cutter, deburring tool and storage box

Specifications

TypeOther Appliances
Width13.39

Questions about this item

Will the 7/8-inch die work with my existing 1/2-inch copper pipe stock?

The kit includes seven dies covering 1/4, 5/16, 3/8, 1/2, 5/8, 3/4 and 7/8 inch outer diameters, so your 1/2-inch pipe is directly supported.

How do I verify the ratchet mechanism is bending to a true 90-degree angle?

Bend a test piece of soft copper or aluminum tube and check the angle with a square or protractor; the tool is designed for up to 90 degrees in both forward and reverse directions.

Does the package include a deburring tool or must I buy one separately?

The box contains seven bending dies, a reverse bending attachment, a copper pipe cutter, an inner/outer reamer, a deburring tool and a plastic storage case — no extra purchase is required.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.