We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Stainless steel commercial snowflake ice machine with liquid cooling, touch panel, and included buckets and accessories

VEVOR

VEVOR QLX1603-1 Commercial Snowflake Ice Machine 529.1LBS/24H Liquid Cooling

SKU CH-HRRE-57SZ8

Produces up to 529.1 lbs of snowflake ice daily with liquid cooling, adjustable textures and a touch control panel

  • TypeOther Appliances
  • Produces 529.1 lbs of ice every 24 hours for high-volume demand
  • Liquid cooling cuts refrigeration time to 40 seconds for rapid start-up
  • Stepless speed control creates snow, spaghetti or waterfall ice textures
  • Touch panel with one-touch cleaning simplifies daily operation
  • SUS201, SUS304 and 5CR15 stainless steel construction resists corrosion

High-Capacity Commercial Ice Production

The VEVOR QLX1603-1 produces up to 529.1 lbs of snowflake ice every 24 hours. Its liquid-cooling system reaches operating temperature in 40 seconds and forms ice within three seconds after pre-cooling. A stepless speed regulator lets operators choose between snow ice, spaghetti or waterfall textures. The intelligent touch panel displays roller speed and includes one-touch cleaning for daily workflow.

700 W Liquid-Cooled Operation

A 700 W compressor drives the refrigeration cycle while the liquid-cooling circuit removes heat continuously during extended runs. This arrangement sustains output without the temperature spikes common in air-cooled units of similar capacity. Stainless-steel construction using SUS201, SUS304 and 5CR15 grades resists corrosion in humid kitchen environments. The 4 L bucket capacity supports batch collection between service intervals.

Upgrade from Smaller Batch Machines

Venues currently limited to lower daily volumes or manual shavers gain continuous, texture-adjustable production without adding floor footprint. The 560 x 390 x 540 mm cabinet fits standard prep-table depth while delivering 240 kg daily throughput. Operations needing cube, nugget or flake ice instead of shaped snow ice should evaluate dedicated cube makers.

Highlights

  • Produces 529.1 lbs of ice every 24 hours for high-volume demand
  • Liquid cooling cuts refrigeration time to 40 seconds for rapid start-up
  • Stepless speed control creates snow, spaghetti or waterfall ice textures
  • Touch panel with one-touch cleaning simplifies daily operation
  • SUS201, SUS304 and 5CR15 stainless steel construction resists corrosion

Specifications

TypeOther Appliances

Questions about this item

How do I connect the water lines for the liquid cooling system on this VEVOR QLX1603-1?

Attach the supplied inlet and outlet pipes to the rear connections, fill the 4 L bucket with water, and ensure all fittings are tight before powering on; the machine reaches refrigeration temperature in 40 seconds.

Which parts of the VEVOR QLX1603-1 will need regular cleaning or replacement?

The two 4 L buckets, ice shovel, catchment box, bowl, funnel, and inlet/outlet pipes should be washed daily; the SUS201, SUS304, and 5CR15 stainless surfaces resist corrosion but still require routine sanitising.

What limits continuous output on the VEVOR QLX1603-1 during a long service period?

The 700 W compressor and liquid cooling system sustain production up to 529.1 lbs per 24 hours; the 4 L bucket capacity and stepless roller speed determine how quickly you must harvest ice to avoid interruption.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.