We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Low-profile aluminium-steel floor jack with long handle and four wheels

VEVOR

VEVOR QJD-LTD030A-00 3 Ton Low Profile Floor Jack

SKU CH-M8NB-N49E0 MPN QJD-LTD030A-00

Lifts up to 6600 lb from a 90 mm minimum height to 500 mm using a hydraulic dual-pump aluminium-steel frame weighing 30.05 kg

  • TypeOther
  • Lifts up to 3 tonnes for heavy vehicles
  • Low 90 mm entry clears lowered chassis
  • Dual-pump hydraulics reach full height in fewer strokes
  • Aluminium-steel frame weighs just 30.05 kg for portability
  • 1145 mm handle gives strong leverage with less effort

Low Profile Floor Jack 3 Ton

This VEVOR floor jack lifts up to 3 tons and suits low-clearance vehicles in home garages or track paddocks. The aluminium and steel frame keeps the unit at 66.2 lb while the dual-pump hydraulic system raises the saddle from 90 mm to 500 mm. Racers and DIY mechanics who need a compact, portable jack will find the 740 mm length easy to manoeuvre. Buyers who need more than 3 tons of capacity or a taller lift range should look elsewhere.

Quick Dual Pump Setup

The 1145 mm handle gives enough leverage to reach maximum height in a few strokes without excessive effort. Dual-pump action speeds the initial lift before switching to high-pressure mode under load. Ensure the release valve is fully closed before pumping or the jack will not build pressure. On uneven floors the 325 mm width can tip if the load shifts, so always chock wheels and work on level concrete.

Check Vehicle Clearance First

Verify the 90 mm minimum height clears your sills or chassis rails before ordering. The 99 mm saddle diameter fits most factory jack points but may require a rubber pad for pinch welds. Confirm the 500 mm maximum height provides enough working space for wheel removal on your specific car. The 30.05 kg weight means one person can move it, yet a trolley is helpful for frequent repositioning.

Highlights

  • Lifts up to 3 tonnes for heavy vehicles
  • Low 90 mm entry clears lowered chassis
  • Dual-pump hydraulics reach full height in fewer strokes
  • Aluminium-steel frame weighs just 30.05 kg for portability
  • 1145 mm handle gives strong leverage with less effort

Specifications

TypeOther

Questions about this item

How do I know the jack is lifting correctly after assembly?

The saddle should rise smoothly from the 90 mm minimum to the 500 mm maximum height when you pump the handle, and the hydraulic ram must hold the load without dropping.

What comes in the box and what must I supply?

The floor jack itself is included — weighing 30.05 kg with a 1145 mm handle — but you will need to provide jack stands and wheel chocks for safe vehicle support.

Which version of this 3-ton jack should I choose?

Only the QJD-LTD030A-00 model is offered, featuring an aluminum-and-steel frame, dual-pump hydraulics, 99 mm saddle diameter and a 740 x 325 x 150 mm footprint.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.