We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green rectangular pool safety cover with center end step, mesh fabric and metal anchors

VEVOR

VEVOR Pool Safety Cover 18x36ft Rectangle Inground with 4x10ft Center End Step Green

SKU CH-CKQW-W38KZ

Mesh safety cover fits an 18 by 36 foot rectangle inground pool with a 4 by 10 foot center end step, using PP fabric, brass anchors and stainless steel springs

  • TypeOther Appliances
  • High-strength PP material resists wear for long-lasting durability
  • Fits 18x36 ft inground pools with 4x10 ft center end step
  • Brass anchors and stainless steel springs secure cover for child and pet safety
  • Triple stitching and dual-strap design blocks leaves and dust effectively
  • Mesh construction with drainage holes reduces evaporation and maintains water temperature

Pool Safety Cover 18x36 ft

The VEVOR safety cover fits rectangular inground pools measuring 18x36 ft and includes a 4x10 ft center end step section. High-strength PP material with triple stitching and dual straps blocks leaves and dust while reducing evaporation. Brass anchors and stainless-steel springs secure the cover to protect children and pets from accidental entry.

Coverage and limits

The cover itself measures 20x38 ft, providing overlap for the 18x36 ft pool and the 4x10 ft step area. PP thickness is 0.35 mm, so the fabric handles seasonal debris and winter loads but is not rated for heavy foot traffic or standing water beyond normal drainage. Thirty ground anchors and springs distribute tension across the perimeter.

Anchoring interface

Installation uses 30 brass anchors set into the pool deck with a 1/4-inch wrench and the supplied installation rod. Springs attach to the cover’s dual-strap edges, creating a tensioned mesh that drains through built-in holes. The system requires a solid deck surface for anchor embedding and does not attach to soft ground or liner-only pools.

Highlights

  • High-strength PP material resists wear for long-lasting durability
  • Fits 18x36 ft inground pools with 4x10 ft center end step
  • Brass anchors and stainless steel springs secure cover for child and pet safety
  • Triple stitching and dual-strap design blocks leaves and dust effectively
  • Mesh construction with drainage holes reduces evaporation and maintains water temperature

Specifications

TypeOther Appliances

Questions about this item

Will the 20x38 ft cover with 4x10 ft step overlap my 18x36 ft rectangle pool deck?

The cover measures 20x38 ft overall with a 4x10 ft center end step, giving roughly 1 ft of overlap on each side of an 18x36 ft pool for secure anchoring.

How can I verify the brass anchors and stainless steel springs are holding tension correctly after installation?

Each of the 30 springs should stretch evenly and the cover surface sits flat without sagging; the supplied installation rod lets you check and adjust tension on every anchor point.

Which fixing components are included in the box and what must I source separately?

The package contains the PP cover, 30 ground anchors, 30 springs, installation rod, 1/4-inch wrench, stamped aluminum part and user manual; no extra hardware is required for a standard concrete deck.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.