We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular carbon-steel pool heat pump unit, light-grey finish, horizontal louvred vents on side, top-mounted fan grille

VEVOR

VEVOR Pool Heat Pump 22250 BTU 6.3 COP AC120V 60Hz

SKU CH-F73N-HHBWD

Electric heat pump warms or cools 3,171–6,605 gallon pools with 22,250 BTU output and 6.3 COP efficiency

  • TypeOther Appliances
  • Rapidly warms 3,171–6,605 gal pools with 22,250 BTU output
  • Cuts electricity costs using 6.3 COP heat-transfer efficiency
  • Heats water 15.6–40 °C and cools 7.8–27.8 °C for year-round comfort
  • Runs on standard AC120V 60 Hz household supply with no special wiring
  • Includes metric-imperial connectors, drain hose and shock-absorbing pads for quick setup

Electric Pool Heat Pump 22250 BTU

This electric heat pump delivers 22,250 BTU of heating capacity for above-ground and in-ground pools between 3,171 and 6,605 gallons. It operates on AC120V 60Hz power and provides both heating and cooling functions. A coefficient of performance of 6.3 indicates efficient heat transfer from air to water.

Included Connector Kit and Drain Accessories

The universal metric-imperial connector kit includes two fittings to simplify plumbing integration with existing pool circulation systems. Two drain nozzles and a 2-metre drain hose support condensate removal and seasonal draining. Four shock-absorbing pads reduce vibration transmission to the installation surface.

Operating Temperature Limits

Heating mode functions between 60 and 104 degrees Fahrenheit while cooling mode operates from 46 to 82 degrees Fahrenheit. The unit draws a maximum input of 6.43 kBTU/h and requires a dedicated 120V 60Hz supply. Carbon steel construction weighs 92.6 lbs, so a stable, level pad is necessary.

Highlights

  • Rapidly warms 3,171–6,605 gal pools with 22,250 BTU output
  • Cuts electricity costs using 6.3 COP heat-transfer efficiency
  • Heats water 15.6–40 °C and cools 7.8–27.8 °C for year-round comfort
  • Runs on standard AC120V 60 Hz household supply with no special wiring
  • Includes metric-imperial connectors, drain hose and shock-absorbing pads for quick setup

Specifications

TypeOther Appliances

Questions about this item

How often should I clean the filter or heat exchanger on the VEVOR VDPYCA-65 pool heat pump?

Rinse the air-side coil and check the drain nozzle each season; the 2 m drain hose and universal connector kit make debris removal straightforward without special tools.

At what air temperature does the heat pump stop heating efficiently?

The heating range ends at 15.6 °C (60 °F); below that the unit cannot maintain the 22,250 BTU output and will cycle off to protect the compressor.

How loud is the unit when it runs continuously at 6.3 COP?

The supplier rates it as low noise; at 92.6 lbs and 35.9 × 14.0 × 24.5 inches the cabinet dampens vibration, and the four shock-absorbing pads further reduce transmitted sound during all-day operation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.