We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue PVC pool drain hose coiled, 50 ft length, 2 inch diameter, camlock connectors and clamps included

VEVOR

VEVOR Pool Drain Hose 2 in x 50 ft PVC Blue Camlock C E Connectors Clamps

SKU CH-KH6P-9NMQG

A 50 ft blue PVC backwash hose with 2 in inner diameter, 58 psi working pressure, and aluminium camlock C and E fittings plus four stainless steel clamps for pool pumps and sand filters

  • TypeOther Appliances
  • Width11.02
  • 50 ft length reaches across large pools
  • 2 in inner diameter fits 1-1/2 in PVC pipes
  • Double-layer braided PVC withstands 58 psi working pressure
  • Aluminium camlock C & E fittings with four stainless clamps enable quick setup
  • Blue PVC resists weather and temperature extremes

Pool Drain Hose 2 in x 50 ft

This blue PVC hose measures 50 ft (15.24 m) long with a 2 in (50.8 mm) inner diameter and a flat width of 3.27 in (83 mm). It is built from double-layer braided PVC rated for 58 psi (4 bar) working pressure and 174 psi (12 bar) burst pressure. The package includes aluminum camlock C and E connectors plus four stainless steel clamps sized 1.7–2.5 in (44–64 mm).

Check Your Pump And Filter Connections

Verify that your pump or sand filter outlet accepts a 2 in hose and that the camlock C and E fittings match the port type on your equipment. Ensure the clamp range of 1.7–2.5 in covers the outer diameter of your connection point so the supplied clamps can seal properly. Confirm the system pressure does not exceed 58 psi to stay within the hose working limit.

Suits Pool Owners Needing Long Backwash Runs

This hose suits pool owners who need a 50 ft reach for backwashing sand filters or draining water with standard 2 in fittings. It is not for installations that require a different inner diameter, a higher pressure rating than 58 psi, or connector types other than the supplied camlock C and E. Buyers needing a shorter length or alternative fittings should look elsewhere.

Highlights

  • 50 ft length reaches across large pools
  • 2 in inner diameter fits 1-1/2 in PVC pipes
  • Double-layer braided PVC withstands 58 psi working pressure
  • Aluminium camlock C & E fittings with four stainless clamps enable quick setup
  • Blue PVC resists weather and temperature extremes

Specifications

TypeOther Appliances
Width11.02

Questions about this item

What comes in the package and do I need to buy extra clamps or fittings?

The box includes one 50 ft backwash hose, one set of aluminum camlock C and E connectors, and four stainless steel clamps sized 44 to 64 mm. No extra clamps or fittings are required for installation.

How do I decide between the different length or diameter options for this hose?

This listing is a single 50 ft length with a 2 in inside diameter and a 3.27 in flat width, rated for 58 psi working pressure. Choose it when your pump or filter uses a 2 in port and you need a 50 ft run.

What does the 58 psi working pressure mean when the hose is connected to my pool pump?

It means the hose can safely handle continuous pressure up to 58 psi (4 bar) during normal backwash or drain cycles, with a burst rating of 174 psi (12 bar) for pressure spikes.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.