We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Galvanized steel pocket door frame kit, silver and brown, 84 inches tall, 3.5 inches deep

VEVOR

VEVOR Pocket Door Frame Kit 24-36 in Wide 80 in High

SKU CH-K3RP-YKFCC

A space-saving pocket door frame kit for 24 to 36 inch wide by 80 inch high doors with a two-way soft-close mechanism and galvanised steel construction

  • TypeOther Appliances
  • Width7.48
  • Slides into wall, freeing up to 36 in of swing space
  • Two-way soft close shuts door silently and protects hardware
  • Galvanized Q235A steel frame resists rust and supports 130 lb doors
  • Track cuts to fit any opening between 24 in and 36 in wide
  • Pre-assembled 72.68 in kit installs in standard 80 in high rough openings

Space-saving pocket door frame

This pocket door frame kit lets a door slide inside the wall cavity instead of swinging into the room. It fits door openings from 24 to 36 inches wide and 80 inches high. The assembled frame measures 72.68 by 3.54 by 84.06 inches and weighs 22.60 pounds including all accessories.

Suits tight layouts, not heavy solid doors

Homeowners remodelling bathrooms, closets or narrow hallways gain floor space because no swing clearance is needed. The two-way soft-close mechanism damps the door at both ends of travel for quiet operation. Builders needing to hang doors heavier than 130 pounds or wider than 36 inches should choose a different hardware system.

Galvanized steel track handles daily cycling

The Q235A steel track and frame carry 88 to 130 pound doors through repeated open-close cycles without sagging. The galvanized finish resists rust in humid rooms such as bathrooms. The track can be cut on site to match the exact opening width, so the soft-close action stays aligned over the life of the installation.

Highlights

  • Slides into wall, freeing up to 36 in of swing space
  • Two-way soft close shuts door silently and protects hardware
  • Galvanized Q235A steel frame resists rust and supports 130 lb doors
  • Track cuts to fit any opening between 24 in and 36 in wide
  • Pre-assembled 72.68 in kit installs in standard 80 in high rough openings

Specifications

TypeOther Appliances
Width7.48

Questions about this item

What door thickness does the 7.48 in frame kit accommodate?

The assembled frame measures 3.54 in deep and is designed for standard door openings, so a typical 1 3/8 in or 1 3/4 in thick door will fit within the pocket cavity.

Can the soft-close mechanism handle a 30 kg reclaimed pine door I already own?

Yes, the kit is rated for doors weighing 30-60 kg, so a 30 kg door falls at the lower end of the recommended range and will close smoothly.

How do I verify the soft-close is calibrated correctly after installation?

Open the door fully and release it; the door should glide into the pocket and latch gently without slamming or bouncing back, confirming the two-way soft-close is functioning.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.