We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular steel magnetic lifter with chrome hook, rubber-wrapped handle and safety switch, neodymium magnet base visible

VEVOR

VEVOR PML-600 Magnetic Lifter 1320 lbs 600 kg

SKU CH-ZVXD-BRZ97

Lifts steel sheets, blocks and rods up to 1320 lbs using N42 neodymium magnets with a 2.5 safety factor and a chrome-plated anti-collision handle

  • TypeOther Appliances
  • Width9.65
  • Lifts 1320 lbs with N42 neodymium magnets
  • 5 safety factor exceeds 3300 lbs pull-off force
  • Chrome-plated hook resists rust and deformation
  • Safety switch handle prevents accidental activation
  • CE certified for -40 °C to +80 °C operation

Magnetic Lifter PML-600

The VEVOR PML-600 is a permanent magnetic lifter rated for 1320 lbs or 600 kg. It uses twelve N42 neodymium magnets in a steel housing to handle steel sheets, blocks, rods and cylindrical ferromagnetic parts. The unit weighs 44.1 lbs and measures 8.3 by 4.6 by 4.6 inches. A chrome-plated hook and rubber-wrapped safety handle are fitted as standard.

Upgrade from clamps or slings

This lifter replaces manual clamps, chains or slings when moving flat or round steel stock between 0.2 and 2.2 inches thick. The 2.5 safety factor means the pull-off force exceeds 3300 lbs, so the jump is worth it when a single operator needs fast, secure attachment without marking the workpiece. It is not suited for non-magnetic metals, thin sheet below 0.2 inches or loads exceeding the rated capacity.

Permanent magnet limits

The magnet is always active; the rotating shaft only redirects the internal field to release the load. Operation is rated from -40 to +176 degrees Fahrenheit, so extreme heat or cold outside this range will reduce holding force. The base size of 210 by 118 by 118 mm limits contact area on curved or irregular surfaces, and the 12 magnet array requires a clean, flat mating face for full capacity.

Highlights

  • Lifts 1320 lbs with N42 neodymium magnets
  • 5 safety factor exceeds 3300 lbs pull-off force
  • Chrome-plated hook resists rust and deformation
  • Safety switch handle prevents accidental activation
  • CE certified for -40 °C to +80 °C operation

Specifications

TypeOther Appliances
Width9.65

Questions about this item

What base dimensions and weight must my hoist or crane accommodate for the PML-600 lifter?

The base measures 8.3 by 4.6 by 4.6 inches and the unit weighs 44.1 lbs, so the supporting hoist or crane must handle that footprint and mass.

How do I engage and release the magnet, and what is the common mistake?

Press the safety switch then rotate the chrome-plated handle; the step people miss is failing to press the switch first, which prevents the handle from turning.

What thickness range of steel plate can the lifter handle before performance drops?

It is rated for sheet thickness from 0.2 to 2.2 inches; outside that range the magnetic grip weakens significantly.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.