We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
VEVOR pipe notcher, aluminum and stainless steel body, adjustable angle scale, reinforced base

VEVOR

VEVOR Pipe Notcher 0.5-2 in 0-60° Aluminum Stainless Steel

SKU CH-BZ33-TD9KV

Notches 12.7-50.8 mm round pipes at adjustable 0-60° angles using standard hole saws

  • TypeOther Appliances
  • Width8.86
  • Notches pipes from 0.5 to 2 inch with one tool
  • Adjustable 0 to 60 degree angle for precise cuts
  • Works with common 3/4 to 3-1/4 inch hole saws
  • Steel plate construction with reinforced base for stability
  • Compact 13.98 x 6.1 x 6.61 inch footprint fits any bench

Pipe Notcher for 0.5-2 in Pipes

This VEVOR pipe notcher handles round pipes from 0.5 to 2 inches and adjusts from 0 to 60 degrees. It is built from aluminum and stainless steel for durability. The tool suits repair shops, home projects and metalworking tasks where precise notching is required.

Check Mounting and Hole Saw Compatibility

Verify that your workbench or drill press can accommodate the 355 by 155 by 168 mm footprint and 2.73 kg weight. Ensure you have compatible hole saws in the 3/4 to 3-1/4 inch range, as they are not included with the notcher.

Integrates with Drill Press or Milling Cutter

The notcher mounts to a drill press, milling cutter or round cutter to free up hand-held cutting time. Its reinforced base provides stability for repeatable joints, while the adjustable angle scale speeds up setup for multiple pipe diameters.

Highlights

  • Notches pipes from 0.5 to 2 inch with one tool
  • Adjustable 0 to 60 degree angle for precise cuts
  • Works with common 3/4 to 3-1/4 inch hole saws
  • Steel plate construction with reinforced base for stability
  • Compact 13.98 x 6.1 x 6.61 inch footprint fits any bench

Specifications

TypeOther Appliances
Width8.86

Questions about this item

Does the pipe notcher come with hole saws, or do I need to buy them separately?

Hole saws are not included; the unit works with common hole saws from 3/4 to 3-1/4 inch and must be purchased separately.

The adjustable angle goes from 0 to 60° — how do I pick the right setting for my joint?

Use the clear angle scale on the base to set any angle between 0 and 60°; the scale lets you match the exact mitre required for the pipe joint you are fabricating.

The notcher weighs 6.02 lbs and measures 13.98 x 6.1 x 6.61 inch — will it stay steady on a bench without bolting it down?

The reinforced steel-plate base and 6.02 lb weight give it enough mass and stability for precise notching on a benchtop without permanent mounting.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.