We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Flat 18-foot heating cable with built-in thermostat and 3-foot power cord

VEVOR

VEVOR PFPC1-1A018 Pipe Heating Cable 18FT 7W/FT

SKU CH-ZT25-DXP9J

An 18-foot pipe heating cable with a built-in thermostat that activates at 415 and deactivates at 64.418, accurate to ±1°C, weighing 1.5 lbs and including fiberglass cloth tape

  • TypeOther Appliances
  • Prevents pipe freezing with 18 ft self-regulating heat cable
  • Built-in thermostat activates at 415 °F and deactivates at 64.418 °F
  • ±1 °C accuracy maintains consistent pipe temperature
  • Lightweight 1.5 lb design simplifies installation on PVC or metal
  • Includes 3 ft power cord and fiberglass cloth tape for secure wrapping

18 ft Self-Regulating Pipe Heating Cable

The VEVOR PFPC1-1A018 supplies 7 W per foot across an 18 ft heating length with a 3 ft power cord. A built-in thermostat activates the cable at approximately 415 and deactivates it at 64.418, maintaining regulation within ±1°C. The unit weighs 1.5 lbs (0.69 kg) and includes a roll of fiberglass cloth tape for securing the cable to the pipe surface.

Homeowners protecting exposed water lines

This cable suits residential and light-commercial installations where PVC, metal or plastic pipes risk freezing in unheated spaces. The fixed 18 ft length and preset thermostat limits make it less suitable for very long runs, for pipes requiring adjustable temperature set-points, or for installations needing a longer power lead without an extension.

Fiberglass cloth tape simplifies attachment

The supplied tape wraps around pipe and cable to hold the heating element in close thermal contact without additional fasteners. No controller, sensor probe or mounting brackets are included, so the thermostat function relies entirely on the factory-set on and off temperatures.

Highlights

  • Prevents pipe freezing with 18 ft self-regulating heat cable
  • Built-in thermostat activates at 415 °F and deactivates at 64.418 °F
  • ±1 °C accuracy maintains consistent pipe temperature
  • Lightweight 1.5 lb design simplifies installation on PVC or metal
  • Includes 3 ft power cord and fiberglass cloth tape for secure wrapping

Specifications

TypeOther Appliances

Questions about this item

What power source is required for the 3 FT power cord on this heat cable?

The cable uses a standard 3 FT power cord that plugs into a regular household AC outlet.

Can the 18 FT heating cable be installed on existing PVC or metal pipes without replacing them?

Yes, it is designed to protect PVC hose, metal and plastic pipes from freezing and can be wrapped directly onto installed pipework.

How do I verify the built-in thermostat is cycling correctly after wrapping the cable?

The thermostat activates the cable at 415 and turns it off at 64.418 with ±1°C accuracy, so the pipe surface should warm near the on point and cool near the off point.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.