VEVOR
VEVOR PAS-30A 1/10 HP 120V 360 GPH 46 ft 6 ft hose
A portable 1/10 HP electric pump moves 360 GPH to 46 ft head with a 6 ft suction hose kit included
- TypeOther
- Moves up to 360 gallons per hour for fast water transfer
- 1/10 HP motor delivers 46 ft head lift for elevated pumping
- Aluminium alloy body resists wear and corrosion while weighing only 5.3 lbs
- Flat base design keeps pump stable and reduces operating noise
- Includes 6 ft suction hose, strainer, impeller and two carbon brushes
Portable water transfer pump
The VEVOR PAS-30A is a 1/10 HP electric utility pump that runs on 120V AC power. It delivers up to 360 GPH with a maximum head lift of 46 ft. The aluminium alloy housing weighs 5.3 lbs and includes a flat base for stable operation. A 6 ft power cord and 6 ft suction hose are supplied.
Flow capacity and head limits
At open discharge the pump moves 360 gallons per hour through a 3/4 inch GHT connection. Head pressure reduces flow as height increases, reaching zero at 46 ft. The 6800 RPM motor and NBR rubber impeller handle clean water in garden, rain barrel, pool, pond or aquarium tasks. It is not designed for dirty water, chemicals or continuous duty cycles.
Upgrade from manual or smaller pumps
This unit replaces hand siphons, battery buckets or lower-flow fountain pumps when a steady 360 GPH stream is needed. The kit adds a strainer, spare impeller and two carbon brushes so maintenance stays in-house. Buyers who need higher pressure, longer hose runs or solids handling should look at larger transfer or trash pumps.
Highlights
- Moves up to 360 gallons per hour for fast water transfer
- 1/10 HP motor delivers 46 ft head lift for elevated pumping
- Aluminium alloy body resists wear and corrosion while weighing only 5.3 lbs
- Flat base design keeps pump stable and reduces operating noise
- Includes 6 ft suction hose, strainer, impeller and two carbon brushes
Specifications
| Type | Other |
|---|
Questions about this item
Will the GHT 3/4 inlet and outlet fit the garden hoses I already use?
Yes — the pump uses standard GHT 3/4 connections, so common garden hoses thread straight on without adapters.
How can I confirm the 1/10 HP motor is running at the rated 6800 RPM after installation?
With the pump primed and the 6 ft suction hose submerged, you should see a steady stream reaching the 46 ft head lift and a flow near 360 GPH.
Does the box include the 6 ft suction hose, carbon brushes, impeller and suction strainer, or must I buy any of them separately?
All four items — 6 ft suction hose, two carbon brushes, impeller and water suction strainer — are packed in the box; nothing extra is required to start pumping.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
