We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two coiled black hydraulic steering hoses with metal fittings, 20 ft each

VEVOR

VEVOR Outboard Hydraulic Steering Hose Kit 20 ft 2-Piece TPEE 300 HP

SKU CH-5RQJ-M9XYZ

Two 20 ft leak-proof TPEE hoses rated to 20 Mpa for hydraulic outboard steering up to 300 HP

  • TypeOther Appliances
  • Width14.57
  • 20 ft hose length reaches distant steering stations
  • 2-piece kit supplies both supply and return lines
  • Leak-proof TPEE construction resists hydraulic fluid loss
  • 300 HP rating supports high-power outboard installations
  • 20 MPa pressure rating handles demanding steering loads

VEVOR 20 ft Hydraulic Hose Kit

This kit supplies two 20 ft hydraulic steering hoses built from leak-proof TPEE material. It is designed for marine hydraulic outboard steering systems rated up to 300 HP. Boat owners and marine technicians use it to complete or refresh the hydraulic link between helm and cylinder.

Two-piece leak-proof hose set

The package contains two identical hoses, each measuring 20 ft (6090 mm) with a 0.52 in (13.2 mm) outer diameter. Rated for 20 MPa maximum pressure, the TPEE construction resists permeation and external abrasion. Having two hoses in one box covers both pressure and return lines without ordering separate lengths.

Straightforward routing and crimping

At 3.1 lbs total weight the pair is light enough to handle alone, yet the 239.8 in length demands careful routing to avoid kinks or tight bends. Installers must verify that existing helm and cylinder fittings match the 0.52 in hose diameter before crimping. Incorrect ferrule seating is the most common cause of leaks during first pressurisation.

Highlights

  • 20 ft hose length reaches distant steering stations
  • 2-piece kit supplies both supply and return lines
  • Leak-proof TPEE construction resists hydraulic fluid loss
  • 300 HP rating supports high-power outboard installations
  • 20 MPa pressure rating handles demanding steering loads

Specifications

TypeOther Appliances
Width14.57

Questions about this item

How often should the 2-piece TPEE hydraulic steering hose kit be inspected or replaced under normal marine use?

Inspect the 20 ft hoses before each season for abrasion, kinks or fitting corrosion; replace the 0.52 inch OD TPEE lines if any cover damage or weeping is found at the 20 MPa rated pressure.

What pressure limit is reached first when the steering system runs continuously at high load?

The 20 MPa maximum working pressure of the 13.2 mm OD hoses is the limiting factor; sustained helm pressure above this value risks hose burst or fitting blow-off.

How much heat does the 20 ft hydraulic hose assembly add to the helm pump during all-day operation?

The 1.4 kg TPEE hose set adds negligible heat; fluid temperature rise comes from the helm pump and cylinder, not from the 6090 mm hose runs themselves.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.