VEVOR
VEVOR NWA-D15 Retractable Air Hose Reel 3/8 in x 50 ft 300 PSI 180° Swivel Mount
A 50-foot, 3/8-inch hybrid hose rated to 300 PSI retracts into a 180-degree swivel bracket for ceiling or wall mounting
- TypeOther Appliances
- 50 ft hybrid hose reaches distant work areas
- 300 psi rating handles demanding air tools
- 180° swivel bracket follows movement without kinking
- 5 ft lead-in connects straight to compressor
- 13 lb enclosed reel mounts on wall or ceiling
VEVOR NWA-D15 50 ft Air Hose Reel
The VEVOR NWA-D15 is a retractable air hose reel built for workshops and garages that need a tidy, ready-to-use compressed-air supply. It serves DIY users, automotive hobbyists and light-industrial operators who want a fixed mounting point and automatic retraction.
Enclosed PP housing with 180° swivel mount
The reel body and hose are made from polypropylene, rated for a working pressure of 300 psi across a temperature range of -4° to 113°F. A 180-degree swivel bracket allows the unit to follow the operator, reducing kink risk and letting the 50-foot hose extend across a wide work zone before springing back into the enclosed drum.
Upgrades from loose coiled hoses
This unit replaces tangled floor coils and wall hooks that leave hose exposed to damage and trip hazards. The jump is worth it when a permanent ceiling or wall installation with a 5-foot lead-in hose can stay in place, and when automatic retraction saves time on every air-tool changeover.
Highlights
- 50 ft hybrid hose reaches distant work areas
- 300 psi rating handles demanding air tools
- 180° swivel bracket follows movement without kinking
- 5 ft lead-in connects straight to compressor
- 13 lb enclosed reel mounts on wall or ceiling
Specifications
| Type | Other Appliances |
|---|
Questions about this item
What does the 1/4 inch NPT thread limit the reel to?
The 1/4 inch NPT fitting caps flow to what that thread size can pass, so the 300 psi rating applies only up to that connection point.
What mounting hardware and clearances does the 14.1 x 7.4 x 12.3 inch unit need?
It ships with 2 expansion bolts, 2 self-tapping screws and 2 expandable tubes for ceiling or wall mounting; allow at least the listed footprint plus swing room for the 180° bracket.
How do you tension the spring correctly during installation?
Pull the hose out fully, engage the lock, mount the bracket with the supplied hardware, then release the lock slowly so the spring preloads evenly without kinking the 50 ft hose.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



