VEVOR
VEVOR NumberCNC-100 Welding Positioner 441 lbs 0.55 RPM -45° to 90°
Rotary welding positioner tilts -45° to 90° and rotates 360° at 0.55 RPM, handling 441 lbs horizontally and 220 lbs vertically with electric and foot-pedal control
- TypeOther Appliances
- Handles 441 lbs horizontally for heavy workpieces
- Tilts -45° to 90° for flexible joint access
- Rotates 360° at 0.55 RPM for steady positioning
- 120 W motor with electric and foot-pedal control
- Carbon-steel frame weighs 85.1 lbs for stability
Rotary Welding Positioner for Workshops
The VEVOR NumberCNC-100 is a rotary welding positioner built for workshops that need controlled rotation and tilt during fabrication. It handles workpieces up to 441 lbs horizontally and 220 lbs vertically, covering small structural assemblies and pipe sections. Electric drive and a foot-pedal switch give the operator hands-free speed control while welding, cutting or grinding. Carbon-steel construction keeps the unit rigid under load.
441 lbs Horizontal and 220 lbs Vertical Capacity
At the rated 0.55 RPM the turntable moves slowly enough for consistent bead placement on lighter fixtures. Horizontal capacity reaches 441 lbs, while vertical mounting drops to 220 lbs because the centre of gravity shifts. The fixed speed suits repetitive tasks but offers no high-speed range for rapid positioning between passes. Heavier or off-centre loads will exceed the motor torque before the table stalls.
-45° to 90° Tilt and 360° Rotation Limits
The tilt range runs from -45° to 90°, letting the operator present the joint at flat, horizontal or overhead angles without reclamping. Full 360° rotation is continuous, so long seams can be welded in a single pass. The 120 W motor and fixed 0.55 RPM define the practical envelope; faster rotation or steeper tilt angles are not available on this model.
Highlights
- Handles 441 lbs horizontally for heavy workpieces
- Tilts -45° to 90° for flexible joint access
- Rotates 360° at 0.55 RPM for steady positioning
- 120 W motor with electric and foot-pedal control
- Carbon-steel frame weighs 85.1 lbs for stability
Specifications
| Type | Other Appliances |
|---|
Questions about this item
Will the 441 lbs horizontal load capacity and 0.55 RPM speed work with my existing welding torch and fixture?
The positioner supports 441 lbs horizontally and 220 lbs vertically at 0.55 RPM, so match your torch and fixture weight to those limits before mounting.
How can I verify the -45° to 90° tilt and 360° rotation are operating correctly after setup?
Power on the 120 W motor, use the foot pedal to run through the full -45° to 90° tilt range and a complete 360° turn, and confirm smooth motion without binding.
What components are included in the box and what must I supply separately?
The package contains the positioner, power cord, foot pedal switch, control box, aviation plug, three claws and a user manual; you must provide the workpiece, clamps, welding torch and safety gear.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
