VEVOR
VEVOR NT-A30 Retractable Air Hose Reel 1/2" x 50 ft 300 PSI
A 50 ft hybrid air hose on a spring-rewind steel reel rated to 300 PSI with a 5 ft lead-in and four non-snag rollers for ceiling or wall mounting
- TypeOther Appliances
- Width7.28
- 50 ft reach with 1.5 m lead-in hose
- 300 PSI rating handles demanding air tools
- Auto-rewind mechanism stores hose without kinks
- Four non-snag rollers guide hose smoothly
- Ceiling or wall mount with included bolts
Built for High-Pressure Air Delivery
The VEVOR NT-A30 is a retractable air hose reel that supplies 50 ft of 1/2 in hybrid hose rated to 300 PSI. A 5 ft lead-in hose and 1/2 in NPT connector let it attach directly to a compressor outlet. Four non-snag rollers guide the hose smoothly during extension and retraction.
Spring-Return Action Holds Up to Repeated Cycles
The auto-rewind spring returns the hose evenly after each pull, preventing kinks that restrict flow at the full 300 PSI rating. The single-arm steel frame resists flexing when the hose is fully extended, so pressure drop stays consistent across the 15.24 m length during sustained tool use.
Verify Mounting Surface
The reel measures 440 x 160 x 480 mm and weighs 14.3 kg, so the wall or ceiling must support that load with the four supplied expansion bolts. Confirm the 1/2 in NPT port matches your compressor fitting and that the 50 ft reach covers the intended work area without excess hose.
Highlights
- 50 ft reach with 1.5 m lead-in hose
- 300 PSI rating handles demanding air tools
- Auto-rewind mechanism stores hose without kinks
- Four non-snag rollers guide hose smoothly
- Ceiling or wall mount with included bolts
Specifications
| Type | Other Appliances |
|---|---|
| Width | 7.28 |
Questions about this item
How loud is the auto-rewind mechanism on the NT-A30 when the 50 ft hose retracts after a full day of use?
The reel uses four non-snag rollers to guide the 1/2 in hybrid hose smoothly during rewind, reducing mechanical noise compared with unguided designs.
What existing fitting must my compressor or supply line have to connect the 5 ft lead-in hose on the NT-A30?
The lead-in hose terminates in a 1/2 in NPT connector, so your compressor outlet or supply plumbing needs a matching 1/2 in NPT female port.
Will the NT-A30's single-arm steel bracket align with the mounting holes on my older ceiling-mounted reel?
The unit includes four expansion bolts for fresh installation; hole spacing is 17.3 x 6.3 in, so older brackets with a different pattern will need new holes drilled.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
YINGHUA
YINGHUA 30A 2-channel relay module optocoupler 5V high low trigger
$10.99
0.00013094BTC
In stock