We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
VEVOR NR200 hydraulic steering kit with 13.5 inch wheel and two 26 ft hoses

VEVOR

VEVOR NR200 Hydraulic Steering Kit 200 HP 13.5" Wheel 2×26 ft Hoses 6.9 MPa

SKU CH-JC22-TQT0F

Hydraulic steering kit for single-engine boats up to 200 HP with 13.5-inch wheel, two 26-foot hoses and 5.5 lock-to-lock turns

  • Width13.78
  • Smooth low-effort handling from 6.9 MPa two-way lock helm pump
  • Reliable power for engines up to 200 HP with included cylinder
  • Easy single-station installation using two 26 ft hoses
  • Comfortable control via 13.5 inch steering wheel
  • Lightweight 10.1 kg kit simplifies mounting and reduces transom load

200 HP Hydraulic Steering Kit

The VEVOR NR200 kit provides hydraulic steering for single-station, single-engine outboards rated up to 200 HP. It includes a two-way lock helm pump, a cylinder, two 26 ft hoses and a 13.5 inch steering wheel. The system operates at 6.9 MPa and delivers 5.5 full rudder turns lock-to-lock.

Build Integration

Two pre-cut 26 ft hoses connect the helm pump directly to the cylinder, reducing the number of fittings and potential leak points during installation. The 13.78 inch overall width of the helm assembly determines the dash cut-out space required. The 22.3 lb package weight means the transom and dashboard must support the cylinder and helm without additional reinforcement brackets.

Upgrade Path

This kit replaces mechanical cable steering on boats where cable friction or wear makes helm effort heavy or imprecise. The hydraulic circuit eliminates cable stretch and reduces maintenance to fluid checks and occasional bleeding. The jump is worthwhile when the existing cable run exceeds practical length limits or when the helm feels vague at higher speeds. Boats with dual engines or dual stations need a different configuration.

Highlights

  • Smooth low-effort handling from 6.9 MPa two-way lock helm pump
  • Reliable power for engines up to 200 HP with included cylinder
  • Easy single-station installation using two 26 ft hoses
  • Comfortable control via 13.5 inch steering wheel
  • Lightweight 10.1 kg kit simplifies mounting and reduces transom load

Specifications

Width13.78

Questions about this item

At what pressure does the helm pump reach its 6.9 MPa limit during sustained turning?

The two-way lock helm pump is rated to 6.9 MPa, which is the maximum working pressure the system will see under continuous hard-over manoeuvres.

How hot does the hydraulic fluid get and how loud is the pump when the kit runs all day?

The sealed helm pump and cylinder run silently; fluid temperature rise is minimal during normal day-long operation because the system has no electric motor to generate heat.

What existing boat hardware must I already have to install this NR200 kit on a single engine?

You need a standard 3/4-inch tapered helm shaft, a transom mounting surface for the cylinder, and a single outboard up to 200 HP with a compatible tiller arm.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.