VEVOR
VEVOR NEMA 4X Electrical Enclosure 24x24x12 in IP66 Gray White RAL7035 ST6 630
IP66-rated steel enclosure measuring 60 x 60 x 30 cm with a detachable galvanized mounting plate and lockable hinged door
- TypeOther Appliances
- IP66 and NEMA 4X rating keeps water and dust out of the enclosure
- 5 mm cold-rolled steel with epoxy polyester coating resists corrosion in harsh environments
- Detachable 2 mm galvanised backplate simplifies component mounting inside the box
- Reinforced hinge and lockable latch secure the door against tampering and vibration
- 24 x 24 x 12 inch outer dimensions provide ample space for electrical equipment
VEVOR NEMA 4X Enclosure IP66
The VEVOR NEMA 4X electrical enclosure provides IP66-rated protection against water and dust for indoor and outdoor installations. Built from 1.5 mm cold-rolled steel with an epoxy polyester powder coating in RAL7035 grey-white, it measures 24 x 24 x 12 inches externally. A detachable galvanised mounting plate and wall-mounting pendants are included for component installation.
Check Mounting Space And Cable Entry
Verify that the mounting surface can support the 47.05 lb enclosure and accommodates the 24 x 24 inch footprint with clearance for the hinged door swing. Confirm that your cable glands or conduit fittings match the enclosure wall thickness and that the bottom sealing plate suits your entry requirements. Ensure the IP66 rating meets the specific environmental exposure of the intended location.
Upgrade From Lower NEMA Or IP Ratings
This enclosure replaces boxes rated only for NEMA 1, 2 or 12 and lower IP classes when water jets, heavy dust or outdoor exposure are present. The step up is justified for factories, construction sites or exposed courtyards where driven rain or wash-down occurs. It is not suited for applications requiring submersible ratings or hazardous-location certifications beyond NEMA 4X.
Highlights
- IP66 and NEMA 4X rating keeps water and dust out of the enclosure
- 5 mm cold-rolled steel with epoxy polyester coating resists corrosion in harsh environments
- Detachable 2 mm galvanised backplate simplifies component mounting inside the box
- Reinforced hinge and lockable latch secure the door against tampering and vibration
- 24 x 24 x 12 inch outer dimensions provide ample space for electrical equipment
Specifications
| Type | Other Appliances |
|---|
Questions about this item
What comes in the box with the ST6 630 enclosure?
The package contains the 24 x 24 x 12 in steel enclosure, a 21.7 x 21.7 in galvanised mounting plate already fitted, two keys for the lockable door, a set of wall-mounting pendants and a bottom sealing plate.
Which size should I choose for my installation?
The outer dimensions are 24 x 24 x 12 in (60 x 60 x 30 cm) with inner space of 23.5 x 23.5 x 10.5 in (59.7 x 59.7 x 26.65 cm); select this model when you need that exact internal volume and a 55 x 55 cm backplate.
What does the IP66 rating mean once the box is mounted?
IP66 confirms the foam-sealed hinged door and 1.5 mm steel body block powerful water jets and dust ingress, so equipment stays protected in outdoor or wash-down environments.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Thomas & Betts TY523M Cable Tie 18lb 4in Natural Nylon Stainless Steel Locking Clip Pack 100
CALBRITE S60700FDCC Weatherproof Electrical Box 5.90" x 2.83" 25 cu in
- Electrical Boxes &…
HOFFMAN A12P10G Interior Panel Steel 10.75in H 8.88in W 14 Gauge
- Electrical Boxes &…



