We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Metal hardware kit for twin vertical wall bed with pneumatic rods and mounting plates

VEVOR

VEVOR Murphy Bed Kit Twin Vertical Deluxe Pneumatic YFVTW245

SKU CH-AET7-M7XFC

A pneumatic hardware kit that folds a twin mattress vertically into a cabinet, holding up to 44 lbs and storing at 16 inches deep

  • TypeOther Appliances
  • Width12.4
  • Twin mattress fits 75 x 39 in size
  • Pneumatic rods lift mattress up to 44 lbs
  • Vertical fold stores in 16 in depth
  • Heavy-duty steel frame weighs 14.8 lbs
  • Complete hardware kit includes 72 screws and rods

Vertical Twin Murphy Bed Kit

The VEVOR YFVTW245 hardware kit converts a twin-size mattress into a wall-mounted bed that folds vertically into a cabinet. It is intended for homeowners adding a guest sleeping area to a study, studio or small bedroom where floor space is limited. The pneumatic lever system assists the lift so the bed can be raised or lowered with one hand.

Replaces a Fixed Bed Frame

This kit replaces a traditional stationary frame that permanently occupies roughly 75 by 39 inches of floor area. The jump is worth it when the room must serve a second purpose during the day, such as a home office or play area, and the mattress weight stays within the 44-pound limit. It is not suited for heavier mattresses or for installations that require a horizontal folding motion.

Handles Standard Twin Mattresses

The mechanism accommodates mattresses measuring 75 by 39 inches with a thickness between 6 and 10 inches, holding up to 44 pounds. Once folded the unit projects only 16 inches from the wall, leaving clear floor space. It cannot support queen or king sizes, nor mattresses exceeding the stated weight or thickness range.

Highlights

  • Twin mattress fits 75 x 39 in size
  • Pneumatic rods lift mattress up to 44 lbs
  • Vertical fold stores in 16 in depth
  • Heavy-duty steel frame weighs 14.8 lbs
  • Complete hardware kit includes 72 screws and rods

Specifications

TypeOther Appliances
Width12.4

Questions about this item

What wall height and floor space does the installed kit require?

The installed unit measures 81 inches long, 46.25 inches wide and 82 inches high, so the wall must provide at least that height and the floor must accommodate the 81-by-46.25-inch footprint.

How are the pneumatic rods attached during assembly, and what step is often missed?

The two pneumatic rods connect the large metal plates to the bed frame connection plates using the supplied M8 nuts; the step often missed is tightening both rods evenly so the bed lifts and lowers smoothly without binding.

When should the pneumatic rods be checked or replaced?

Inspect the two pneumatic rods if the bed no longer stays open at the 82-inch height or closes too quickly, as loss of pressure over time will require rod replacement to restore the 44-pound mattress support.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.