We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Aluminum miter gauge with sliding bar, 15 angle stops, T-slot fit

VEVOR

VEVOR Miter Gauge TN-1122A 15 Stops 19×9.5 mm Slot

SKU CH-81B3-SP1Z6

Aluminum miter gauge with 15 positive stops fits 19×9.5 mm table-saw slots for precise angle cuts

  • TypeOther Appliances
  • Width6.1
  • Fits 19×9.5 mm T and U slots on most table saws
  • 15 positive stops at 15° 22.5° 30° 35° 45° 60° 67.5° and 90°
  • Aluminium alloy body gives rigid repeatable cuts
  • Pre-assembled metal plate and bar speed up setup
  • Weighs .73 kg for stable yet portable use

Precision Woodworking Miter Gauge

The VEVOR TN-1122A miter gauge fits standard 19 x 9.5 mm table saw slots. Its aluminum alloy body provides 15 positive angle stops for repeatable crosscuts. Woodworkers needing accurate angled cuts on a table saw will find the adjustable head covers common angles from 15° to 90° in both directions. Builders with non-standard slot sizes should verify fit before purchase.

Solid Aluminum Construction Stability

The gauge weighs 1.6 lbs and measures 450 x 120 x 110 mm, offering a rigid reference surface during cuts. A spring-loaded plunger locks into each stop hole without play, reducing vibration. The detachable disc allows compatibility with both T-shaped and U-shaped slots. No motor or electronics are present, so noise and power draw are not applicable.

Included Hardware For Immediate Setup

The package ships partially assembled with the metal adjustment plate and sliding bar pre-fitted. One handle, a 4 mm hex wrench and a 2 mm hex wrench are included for final assembly and calibration. No software or digital accessories are bundled. Users only need basic hand tools to complete installation.

Highlights

  • Fits 19×9.5 mm T and U slots on most table saws
  • 15 positive stops at 15° 22.5° 30° 35° 45° 60° 67.5° and 90°
  • Aluminium alloy body gives rigid repeatable cuts
  • Pre-assembled metal plate and bar speed up setup
  • Weighs .73 kg for stable yet portable use

Specifications

TypeOther Appliances
Width6.1

Questions about this item

How do I install the VEVOR TN-1122A miter gauge in a 19×9.5 mm table-saw slot, and what step is often missed?

Slide the pre-assembled bar into the 3/4 x 3/8 in slot, then attach the handle with the 4 mm hex wrench; the step often missed is tightening the spring-loaded plunger so the detent engages the 15 positive stops.

What maintenance or replacement will the VEVOR TN-1122A miter gauge need over time?

Periodically clean aluminum chips from the 15 stop holes and the plunger mechanism, lubricate the sliding bar lightly, and replace the 4 mm or 2 mm hex wrenches if they wear or are lost.

What limit appears first when using the VEVOR TN-1122A miter gauge for long, repeated cuts?

The 15 fixed stops at 15°, 22.5°, 30°, 35°, 45°, 60°, 67.5° and 90° are the primary limit; angles between them require proportional adjustment without positive detents.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.