We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact orange and grey welding unit with front control panel, wire spool compartment, carrying handle and torch cable connections

VEVOR

VEVOR MIG-200AU 200A 5-in-1 MIG Welder 110V/220V

SKU CH-JSM3-A9AXK

A dual-voltage 200A welder handles MIG pulse, gas MIG, flux-core, stick and lift TIG with synergic control up to 15 mm thickness

  • TypeOther Appliances
  • Width14.17
  • 5-in-1 versatility covers MIG pulse, gas MIG, flux-core MIG, stick and lift TIG
  • Pulse welding reduces spatter and heat input for cleaner, low-temperature joints
  • Dual 110V/220V input lets you weld on standard or high-power outlets
  • Synergic control auto-sets current and wire speed for 0.03, 0.04, 0.05 inch wires
  • Handles 0.59 inch thick steel with 200 A output from a 27.3 lb portable unit

5-in-1 MIG Welder 200A Dual Voltage

This 200A MIG welder combines MIG pulse, gas MIG, gasless MIG, stick and lift TIG modes in one unit. It runs on 110V or 220V input and uses synergic control to match current and wire feed speed to the selected wire thickness. The machine suits hobbyists and light fabrication shops that need multiple processes without buying separate welders.

Fits Single-Phase Supply Up To 6.1 KVA

The welder draws up to 6.1 KVA, so it plugs into a standard workshop circuit at either voltage. It accepts spools up to 11 lbs and feeds .03 or .04 inch flux core and solid wire plus .04 or .05 inch aluminum wire. A V-shaped and U-shaped drive roller are included to handle different wire types. Gas hose and ground clamp are supplied, but aluminum and lift TIG torches must be sourced separately.

Replaces Single-Process 110V-Only Units

Buyers moving up from a basic 110V flux-core machine gain pulse MIG for cleaner welds on thin sheet, plus stick and lift TIG capability for repair work. The 200A output handles plate up to .59 inch thick, covering most automotive and structural tasks. It does not suit operators who need a built-in aluminum torch or a water-cooled gun for continuous high-amperage runs.

Highlights

  • 5-in-1 versatility covers MIG pulse, gas MIG, flux-core MIG, stick and lift TIG
  • Pulse welding reduces spatter and heat input for cleaner, low-temperature joints
  • Dual 110V/220V input lets you weld on standard or high-power outlets
  • Synergic control auto-sets current and wire speed for 0.03, 0.04, 0.05 inch wires
  • Handles 0.59 inch thick steel with 200 A output from a 27.3 lb portable unit

Specifications

TypeOther Appliances
Width14.17

Questions about this item

At what output current does the 6.1 KVA input capacity limit sustained welding on the MIG-200AU?

The unit draws 6.1 KVA while delivering up to 200A output, so sustained welding at the full 200A rating stays within that input limit.

How loud or hot does the MIG-200AU get when running all day at 200A?

The 27.3 lb chassis with forced-air cooling handles continuous 200A output; fan noise rises with duty cycle but stays comparable to similar 200A inverter welders.

Which torch and drive rollers must I already own to run aluminium wire on the MIG-200AU?

An aluminium MIG torch and the included U-shaped 1.0 / 1.2 mm drive roller are required; the supplied V-roller and flux-core torch are for steel only.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.