We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Manual pipe tube bender with seven dies and rollers

VEVOR

VEVOR Manual Pipe Tube Bender 3/8"-1" OD 7 Dies

SKU CH-RKQ7-6YX2S

Manual pipe bender handles 10-25 mm copper, aluminium, brass and stainless steel tubes up to 2 mm wall thickness, includes seven dies for 180° bends

  • TypeOther Appliances
  • Width9.25
  • Bends 10-25 mm pipes smoothly through 0-180° range
  • Seven dies cover 3/8" to 1" outside diameters
  • Carbon steel frame resists deformation under heavy use
  • Handles copper, aluminium, brass and stainless tubing
  • Compact 485 × 140 × 140 mm footprint fits tight workshops

Capacity and Angle Range

This manual pipe bender handles outside diameters from 10 mm to 25 mm and bends round tubes between 0 and 180 degrees. It is aimed at HVAC technicians, refrigeration installers and automotive repair shops that need accurate copper, aluminium or stainless-steel bends on site.

Upgrade from Fixed-Size Tools

The kit replaces single-diameter benders by supplying seven dies covering 3/8, 1/2, 9/16, 5/8, 3/4, 7/8 and 1 inch sizes with matching radii of 50, 60, 70, 80, 90, 110 and 113 mm. The jump is worth it when a workshop regularly works across multiple pipe diameters and wants one frame instead of several dedicated tools.

Sustained Workshop Use

Carbon-steel construction resists deformation during repeated bending cycles, keeping radius accuracy consistent over long sessions. The 22.4 kg frame stays stable on a bench while the operator forms multiple bends without the tool flexing or slipping.

Highlights

  • Bends 10-25 mm pipes smoothly through 0-180° range
  • Seven dies cover 3/8" to 1" outside diameters
  • Carbon steel frame resists deformation under heavy use
  • Handles copper, aluminium, brass and stainless tubing
  • Compact 485 × 140 × 140 mm footprint fits tight workshops

Specifications

TypeOther Appliances
Width9.25

Questions about this item

How much bench space does the 19.1 x 5.5 x 5.5 inch frame need for mounting?

The bender measures 19.1 inches long, 5.5 inches wide and 5.5 inches high, so allow at least that footprint plus clearance for the handle swing.

Which die and roller pair do I fit first when setting up for a 3/4 inch pipe?

Select the 3/4 inch die and its matching roller, seat the die in the frame, slide the roller onto the pivot pin, then lock both with the supplied pins before bending.

What wear items should I keep spares of for the 7 die sizes?

The seven rollers and seven dies are the contact surfaces; keep a spare roller for each diameter — 3/8, 1/2, 9/16, 5/8, 3/4, 7/8 and 1 inch — to maintain bend quality.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.