We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver-grey steel manual paper press with rotary handle and three-side baffles

VEVOR

VEVOR Manual Paper Press Machine 12x8.6 inch 10cm Steel Frame

SKU CH-87Y0-95CBX

Flattens A4 paper and books up to 5.9" thick with 3306 lbs pressure on a 12" x 8.7" steel frame

  • TypeOther Appliances
  • Width10.63
  • Flattens A4 sheets efficiently with 12" x 8.7" working area
  • Applies up to 3306 lbs pressure via bold screw rod and rotary handle
  • Stays steady on any bench thanks to non-slip feet and twin balance rods
  • Thickened steel frame resists deformation for long service life
  • Detachable three-side baffles simplify loading and aligning paper

Press for A4 documents

This manual paper press handles A4 sized sheets with a 305 x 220 mm working area and 150 mm flattening thickness. The 1500 kg force capacity suits bookbinding, papermaking and document flattening tasks. A rotary handle and bold screw rod transmit pressure through the thickened plate.

Three sided baffles guide alignment

Detachable baffles on three sides keep sheets square while the press closes, reducing mis-feeds during repeated cycles. Non-slip foot pads and an 8 mm baseplate add stability on the bench. The 16 kg steel frame stays rigid under full load.

Hand operated force has physical limits

Maximum pressure of 3306 lbs depends on operator effort and screw thread condition over time. The 150 mm throat depth restricts the thickness of bound signatures or stacked sheets. The 370 x 220 x 330 mm footprint needs a sturdy bench that can support the 36 lb weight.

Highlights

  • Flattens A4 sheets efficiently with 12" x 8.7" working area
  • Applies up to 3306 lbs pressure via bold screw rod and rotary handle
  • Stays steady on any bench thanks to non-slip feet and twin balance rods
  • Thickened steel frame resists deformation for long service life
  • Detachable three-side baffles simplify loading and aligning paper

Specifications

TypeOther Appliances
Width10.63

Questions about this item

Will the screw rod or elongated nut need periodic lubrication or replacement after heavy use?

The press uses a bold screw rod and elongated nut to generate 3306 lbs of pressure; applying light machine oil to the threads periodically will maintain smooth operation and prevent premature wear.

What limits how many sheets I can press at once during a long session?

The effective working area is 12 x 8.7 inches with a maximum flattening thickness of 5.9 inches, so the batch height cannot exceed that 150 mm limit.

Does the steel frame or baseplate get hot or noisy when the press is left clamped all day?

The machine is entirely manual with no motor or heating element, so it produces no noise or heat regardless of how long it remains under load.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.