We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver magnetic drill press with rectangular base, vertical motor housing, coolant tank, three side handles and carrying strap

VEVOR

VEVOR Magnetic Drill Press 1400 W 50 mm 2248 lbf MD-50E

SKU CH-Y3HN-C49E2

Magnetic drill press combines annular drilling, twist drilling and tapping with a 1400 W motor, 10-speed control, 8.66 in stroke and 2248 lbf holding force for steel and pipe work

  • TypeOther Appliances
  • Width7.87
  • Combines annular, twist drilling and tapping in one tool
  • 10000 N magnetic base holds flat steel and curved pipes Ø3.15-11.81 in
  • 10 speed levels 0-750 RPM match soft to hardened steel
  • 220 mm stroke with clear scale gives consistent drilling depth
  • Built-in cooling and lubrication maintain optimal temperature during long use

Versatile Magnetic Drilling Tool

The VEVOR MD-50E is a 1400 W magnetic drill press designed for metalworking tasks. It combines annular drilling, twist drilling, and tapping functions in one unit. The tool suits industrial maintenance and home improvement projects requiring precise holes in steel structures.

Upgrade From Handheld Drilling

This press replaces handheld magnetic drills or manual methods when stability and repeatability matter. The 10-level speed dial up to 750 RPM and 8.66 in stroke allow controlled cutting in hard materials. The jump is worth it for frequent overhead, vertical, or pipe work where a 2248 lbf magnetic base prevents movement.

Check Your Workpiece And Power

Verify the steel surface is flat or curved within the 3.15-11.81 in diameter range for secure magnetic adhesion. Ensure a 15 A circuit is available for the 1400 W motor. Confirm the 50 mm maximum annular cutter capacity matches your hole size requirements before ordering.

Highlights

  • Combines annular, twist drilling and tapping in one tool
  • 10000 N magnetic base holds flat steel and curved pipes Ø3.15-11.81 in
  • 10 speed levels 0-750 RPM match soft to hardened steel
  • 220 mm stroke with clear scale gives consistent drilling depth
  • Built-in cooling and lubrication maintain optimal temperature during long use

Specifications

TypeOther Appliances
Width7.87

Questions about this item

How much flat steel surface does the 2248 lbf magnetic base need to hold securely?

The magnet requires a flat ferrous surface large enough for the 7.87 in wide base to sit fully; it also grips curved pipes from 3.15 to 11.81 in diameter with the supplied strap.

What is the correct order for engaging the magnet and starting the 1400 W motor?

Position the unit, press the magnet switch to engage the 10000 N base, verify it will not shift, then select one of the 10 speed steps up to 750 RPM before drilling.

Which consumables supplied with the MD-50E will need replacement after extended use?

Annular cutters, twist bits up to 316 mm, taps up to M16, the ejector pin, and coolant fluid are wear items; hex wrenches and the chuck key are tools.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.