We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact white macerator pump unit with multiple inlet ports and outlet connection visible

VEVOR

VEVOR Macerator Pump FLO500-CE Pro 500W 29 GPM 26 ft 4 Inlets

SKU CH-X4BM-9HJCX

Grinds waste with a 500 W motor at 29 GPM, lifts 26 ft, and accepts four inlets for toilet, sink, shower and bathtub connections

  • TypeOther Appliances
  • Width7.48
  • 7 HP motor delivers 29 GPM flow for strong flushing power
  • 26 ft lift capability handles wastewater across varied layouts
  • IPX8 copper motor withstands 75 °C / 167 °F water from appliances
  • Four inlets (1 × 89 mm, 3 × 40 mm) connect toilet, sink, shower, bathtub
  • Stainless steel blades grind waste to prevent pipe blockages

Macerator Pump with Four Inlets

The VEVOR FLO500-CE Pro is a 500 W macerator pump built for wall-hung toilets and multi-fixture bathrooms. It suits homeowners adding a basement bathroom or extending plumbing where gravity drainage is impractical. The unit handles wastewater from toilets, showers, sinks and laundry in a single compact assembly. Its 0.7 HP motor delivers 29 GPM flow for reliable daily use.

IPX8 Copper Motor and Multi-Inlet Layout

An oil-filled copper motor rated IPX8 provides waterproof operation and tolerates water temperatures up to 75/167. Four inlets — one 89 mm and three 40 mm — connect directly to toilet, basin, shower and bathtub outlets without extra manifolds. A 40 mm outlet pushes waste vertically to 26 ft or horizontally across long runs. Stainless steel blades grind solids to prevent clogging in narrow pipework.

Practical Limits of 500 W Maceration

The 500 W motor caps maximum head at 26 ft and flow at 29 GPM, so very long horizontal runs with multiple bends may reduce effective performance. The 40 mm outlet diameter restricts use to small-bore pipe systems and excludes large-diameter soil stacks. Waste hotter than 75/167 can damage the motor seals, limiting compatibility with some commercial dishwashers. The pump requires mains electricity and offers no battery backup during power loss.

Highlights

  • 7 HP motor delivers 29 GPM flow for strong flushing power
  • 26 ft lift capability handles wastewater across varied layouts
  • IPX8 copper motor withstands 75 °C / 167 °F water from appliances
  • Four inlets (1 × 89 mm, 3 × 40 mm) connect toilet, sink, shower, bathtub
  • Stainless steel blades grind waste to prevent pipe blockages

Specifications

TypeOther Appliances
Width7.48

Questions about this item

What flow rate does the 500 W motor deliver and what vertical lift can it sustain?

The motor is rated at 500 W and produces a maximum flow of 29 GPM or 110 LPM while overcoming a head of 26 ft or 8 m.

What are the inlet and outlet diameters and the overall unit dimensions?

The pump has one 89 mm inlet, three 40 mm inlets and a 40 mm outlet; the unit measures 420 x 140 x 270 mm (16.54 x 5.51 x 10.63 in).

How is the pump installed and which connection step is often missed?

Mount the unit, attach the toilet via the supplied connection ring, fit the three 40 mm inlet hoses with clamps, connect the 40 mm outlet kit, then plug into a grounded circuit; the step most often missed is securing every hose with its clamp to prevent leaks.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.