We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Manual leather cutting machine with 14.2 x 10.2 in embossing plate, black steel frame, dual guide shafts and side crank handle

VEVOR

VEVOR Leather Cutting Machine 14.2 x 10.2 in Embossing Plate 0.47 in Stroke Specialty Appliance

SKU CH-H9AZ-XZEHT

Manual die cutter with a 14.2 x 10.2 in embossing plate and 0.47 in adjustable stroke for leather and various materials

  • TypeOther Appliances
  • Width14.96
  • Cuts large materials with 14.2 x 10.2 in embossing plate
  • Handles heavy workloads at 3306 lbs load-bearing capacity
  • Fine pressure control via 0.47 in adjustable stroke
  • Stable operation from dual guide shafts and limiting screws
  • Durable steel frame with black oxide resists rust and corrosion

Embossing plate and stroke

The VEVOR leather cutting machine provides a 14.2 by 10.2 inch embossing plate and a 0.47 inch adjustable pressure stroke. It is built for crafters and small workshops that need a manual die cutter for leather, fabric and similar sheet materials. The unit weighs 97.2 pounds and measures 18.9 by 13.0 by 18.7 inches overall.

Upgrade from smaller hand tools

This press replaces hand-held punches, mallet-driven dies and lightweight desktop cutters that cannot apply consistent force across a large area. The jump is worthwhile when you need repeatable cuts on pieces up to the full 360 by 260 mm plate and want to avoid the fatigue and variation of manual hammering.

Behaviour under sustained use

High-strength roller bearings and a manganese steel base plate rated for 3306 pounds resist deformation during long production runs. Limiting screws lock the handle forward to eliminate rebound, while the black oxide coating protects the steel from rust in humid workshop conditions.

Highlights

  • Cuts large materials with 14.2 x 10.2 in embossing plate
  • Handles heavy workloads at 3306 lbs load-bearing capacity
  • Fine pressure control via 0.47 in adjustable stroke
  • Stable operation from dual guide shafts and limiting screws
  • Durable steel frame with black oxide resists rust and corrosion

Specifications

TypeOther Appliances
Width14.96

Questions about this item

What size work surface is needed for the 18.9 x 13.0 x 18.7 in machine footprint?

Allow at least 18.9 inches wide by 13.0 inches deep on a sturdy bench; the unit stands 18.7 inches tall and weighs 97.2 lbs, so the surface must support that load without flex.

How do I set the 0.47 in pressure stroke and what step is often missed?

Turn the limiting screw to lock the handle at the 12 mm stroke; the step users skip is tightening the screw fully so the handle cannot rebound during the cut.

When should the die pad be replaced on the 14.2 x 10.2 in embossing plate?

Replace the die pad when its surface shows deep grooves or no longer gives clean cuts on the 360 x 260 mm plate; a fresh pad restores even pressure across the full stroke.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.