We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
VEVOR KC-503 tire changer, floor standing unit with pneumatic assist arm, silver and black finish

VEVOR

VEVOR KC-503 1.5 HP Tire Changer with Assist Arm

SKU CH-WBBE-C82MP

Tire changer with 1.5 HP copper motor, pneumatic assist arm and air-pressure gauge handles 12–24.4 in rims up to 37.8 in diameter

  • Width29.92
  • Handles passenger-car to light-truck wheels from 12 to 24.4 inch outer diameter
  • Copper-wound 1.5 HP motor delivers 1100 W for strong bead-breaking torque
  • Pneumatic assist arm presses the tyre sidewall to speed up removal of stiff tyres
  • Upgraded jaw covers and padded tools protect alloy rims from clamping damage
  • Pedal-operated controls keep both hands free during mount and demount operations

Universal Tire Changer for Passenger Vehicles

The VEVOR KC-503 is a 1.5 HP tire changer designed for professional garages and serious enthusiasts who service sedans, SUVs and pickup trucks. It handles outer rim diameters from 12 to 24.4 in and inner rim diameters from 12 to 23.2 in with a maximum tire outer diameter of 37.8 in and tire width up to 12 in.

Sustained Operation with Copper Motor

The 1100 W all-copper motor runs on AC 120 V 60 Hz supply to deliver consistent torque during extended tire changing sessions. The pneumatic assist arm applies steady pressure to separate stiff sidewalls from the rim without the power dropping off during repetitive cycles.

Floor Mounted Installation with Included Tools

The unit measures 47.2 x 35.4 x 77.2 in and weighs 518.1 lbs, requiring a solid level floor and sufficient ceiling clearance for the vertical column. Installation uses the supplied handwheel set screw, crowbar and brush, while the four clamping jaw sheaths and two gaskets protect rims; buyers without a dedicated workshop bay or overhead lift access will find positioning difficult.

Highlights

  • Handles passenger-car to light-truck wheels from 12 to 24.4 inch outer diameter
  • Copper-wound 1.5 HP motor delivers 1100 W for strong bead-breaking torque
  • Pneumatic assist arm presses the tyre sidewall to speed up removal of stiff tyres
  • Upgraded jaw covers and padded tools protect alloy rims from clamping damage
  • Pedal-operated controls keep both hands free during mount and demount operations

Specifications

Width29.92

Questions about this item

How much heat and noise does the 1.5 HP copper motor produce during all-day shop use?

The 1.5 HP all-copper motor runs on a 120 V 60 Hz supply at 1100 W, delivering strong power for continuous dismounting; the heavy 235 kg frame and pedal-operated design keep vibration and noise at typical shop-floor levels.

What electrical supply and floor space must I already have for the KC-503 to operate?

You need a standard 120 V 60 Hz outlet for the 1100 W motor and a footprint of roughly 1200 mm wide by 900 mm deep with 1960 mm height clearance for the assembled machine.

Will the 304.8 mm to 620 mm clamping range handle the steel wheels I still use on older pickups?

Yes, the chuck accepts outer rim diameters from 304.8 mm to 620 mm and inner diameters from 304.8 mm to 589.3 mm, covering most legacy steel wheels on sedans, SUVs and pickups.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.