VEVOR
VEVOR HPN-300GK2303 300W Landscape Transformer 12V/14V AC
A 300 W low-voltage transformer converts 120 V AC to 12 V or 14 V AC across three 100 W outputs with a 1–12 hour timer and a 6 ft photocell sensor for automatic dusk-to-dawn operation
- TypeOther Appliances
- Width9.25
- Three independent 100W outputs power spotlights, pathways and landscape lights simultaneously
- 12V/14V AC output with ETL listing ensures safe low-voltage outdoor operation
- Built-in photocell sensor on 6 ft cable enables automatic dusk-to-dawn switching
- 1-12 hour timer adds scheduled control for energy-efficient lighting
- Rust-resistant iron casing rated for -4 to 113 °F withstands year-round weather
300W Landscape Transformer with Three Outputs
This VEVOR low-voltage transformer delivers 300W across three independent 100W groups, converting 120V AC input to 12V or 14V AC output. It suits outdoor installations such as spotlights, pathway lights and pool lighting where multiple circuits need separate control. The built-in timer and photocell sensor add automated operation for residential or light-commercial landscapes. ETL certification is noted by the supplier.
Iron Casing with Photocell and Timer Setup
The unit mounts via supplied self-tapping screws and plastic expansion plugs, while the external photocell connects through a 6 ft sensor cable that keeps the sensor away from artificial night light. Three operating modes run simultaneously, so wiring each 100W group to its terminal block is the main installation step. Avoid placing the photocell under streetlights or bright landscape fixtures, as strong ambient light will prevent automatic switching.
Check Input Voltage and Load Balance Before Ordering
Verify that the supply is 120V AC at 60 Hz and that each lighting group stays within its 100W limit to avoid overloading a single output. The operating temperature range spans -4 to 113, so confirm the mounting location stays inside those limits. Total combined draw must not exceed 300W ±10% across all three outputs.
Highlights
- Three independent 100W outputs power spotlights, pathways and landscape lights simultaneously
- 12V/14V AC output with ETL listing ensures safe low-voltage outdoor operation
- Built-in photocell sensor on 6 ft cable enables automatic dusk-to-dawn switching
- 1-12 hour timer adds scheduled control for energy-efficient lighting
- Rust-resistant iron casing rated for -4 to 113 °F withstands year-round weather
Specifications
| Type | Other Appliances |
|---|---|
| Width | 9.25 |
Questions about this item
How can I confirm the timer and photocell are operating correctly after installation?
Set the timer between 1 and 12 hours and verify the connected lights switch on and off at the programmed times; cover the photoelectric sensor to check that the automatic dusk-to-dawn function activates the output.
What accessories are included in the package and what must be purchased separately?
The box contains the transformer, a 6 ft photoelectric sensor, a user manual, 30 self-tapping M4 screws and 2 plastic expansion plugs; low-voltage cable, wire connectors and the landscape light fixtures themselves are not supplied.
Which output voltage setting — 12 V or 14 V — should I select for my lighting run?
Use the 12 V tap for standard LED or halogen landscape fixtures; choose the 14 V tap only when the cable run is long enough to cause noticeable voltage drop and the fixture manufacturer approves the higher tap.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
YINGHUA
YINGHUA 30A 2-channel relay module optocoupler 5V high low trigger
$10.99
0.00013145BTC
In stock