We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Hydraulic boat steering kit with cylinder pump 13.5in wheel and 24ft hose

VEVOR

VEVOR HK6324A-3 hydraulic steering kit 300HP 24ft hose 13.5in wheel

SKU CH-RTJY-XSQPK MPN HK6324A-3

Hydraulic boat steering kit with 300HP pump, 468KGF cylinder, 13.5in wheel and 24ft hose

  • Width18.9
  • Complete steering kit with pump, cylinder, wheel and 24ft hose
  • 468 KGF cylinder output force for strong steering response
  • Aluminium alloy cylinder resists saltwater corrosion and wear
  • Helm pump rated to 6.9 Mpa / 1000 psi for up to 300HP
  • 5 inch steering wheel included for immediate installation

Complete hydraulic steering kit for outboard motors

This kit bundles a helm pump, steering cylinder, 13.5in steering wheel and 24ft of hose into a single package rated for outboard engines up to 300HP. It is intended for boat owners replacing worn or failed hydraulic steering on vessels that fall within that power range.

Aluminum cylinder with upgraded seals and ORB

The cylinder barrel is made from aluminum alloy for corrosion resistance in saltwater, while the upgraded sealing system guards against compression set. Positionable stainless steel ORB fittings simplify hose routing, and the pump includes a replaceable shaft seal, built-in locking valve, relief valve and airbag for reliable pressure control at 6.9Mpa.

Straightforward bolt-on installation

Mounting the pump, cylinder and wheel follows standard hydraulic steering practice, but installers must bleed the system thoroughly to remove trapped air that causes spongy response. Correct torque on the ORB fittings prevents leaks, and the 24ft hose length must suit the helm-to-engine run without sharp bends that restrict flow.

Highlights

  • Complete steering kit with pump, cylinder, wheel and 24ft hose
  • 468 KGF cylinder output force for strong steering response
  • Aluminium alloy cylinder resists saltwater corrosion and wear
  • Helm pump rated to 6.9 Mpa / 1000 psi for up to 300HP
  • 5 inch steering wheel included for immediate installation

Specifications

Width18.9

Questions about this item

How often should the steering cylinder seals and pump shaft seal be inspected or replaced on this HK6324A-3 kit?

The cylinder uses an upgraded sealing system designed for saltwater resistance, and the helm pump features a replaceable shaft seal; inspect both annually or after heavy use and replace if leakage appears.

Which component reaches its pressure limit first during continuous high-load steering with this 300HP system?

The helm pump is rated for a maximum working pressure of 6.9 Mpa or 1000 psi, and the relief valve will open at that point to protect the circuit.

How much heat does the hydraulic fluid generate and how noisy is the pump when the system runs all day on a 24ft hose run?

The aluminum-alloy cylinder dissipates heat efficiently, and the pump operates quietly thanks to its built-in airbag and locking valve; no abnormal temperature rise or noise is reported under normal 300HP operation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.