We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Hydraulic outboard steering kit with 13.5 inch wheel, cylinder, pump and 16ft hose

VEVOR

VEVOR HK6316A-3 Hydraulic Steering Kit 300HP 16ft Hose 13.5" Wheel

SKU CH-1B78-R31D3 MPN HK6316A-3

Hydraulic steering kit for outboard engines up to 300 HP with 16 ft hose and 13.5 inch wheel

  • Width18.9
  • Complete steering kit with pump, cylinder, wheel and 16 ft hose
  • Aluminium alloy cylinder delivers 468 KGF output force for strong control
  • Helm pump rated for 300 HP at 6.9 Mpa maximum pressure
  • 5 inch steering wheel provides comfortable grip and precise handling
  • ORB fittings on cylinder and pump allow flexible hose routing

Kit Contents and Intended Use

This hydraulic steering kit includes a helm pump, cylinder, two 16 ft hoses and a 13.5" steering wheel. It is built for single-outboard installations rated up to 300HP where a complete, ready-to-fit system is required. Builders needing dual-station control, twin-engine tie bars or a different wheel diameter should look elsewhere.

Hydraulic Limits and Hose Routing

The system operates at a maximum pressure of 6.9 Mpa (1000 psi) and delivers 468 KGF output force from the aluminum-alloy cylinder. The supplied 16 ft hose length fixes the maximum helm-to-cylinder run; longer or more complex routing will require additional hose and fittings not provided in this package.

Installation Notes and Common Issues

The kit uses positionable stainless-steel ORB fittings on both cylinder and pump to simplify hose alignment, and the pump features a replaceable shaft seal and built-in relief valve. Installers must purge all air from the circuit after assembly; trapped air is the most frequent cause of spongy or unresponsive steering feel.

Highlights

  • Complete steering kit with pump, cylinder, wheel and 16 ft hose
  • Aluminium alloy cylinder delivers 468 KGF output force for strong control
  • Helm pump rated for 300 HP at 6.9 Mpa maximum pressure
  • 5 inch steering wheel provides comfortable grip and precise handling
  • ORB fittings on cylinder and pump allow flexible hose routing

Specifications

Width18.9

Questions about this item

Should I pick the 13.5 inch wheel or a different diameter for my 300HP outboard?

This kit ships with a single 13.5 inch steering wheel matched to the 300HP helm pump and 16ft hose set; no alternative wheel sizes are included.

What does the 468 KGF output force feel like at the helm?

The cylinder delivers 468 KGF of pushing force, giving light, responsive wheel effort even when the 300HP engine is at full throttle and the boat is heavily loaded.

Will the 6.9 Mpa / 1000 psi pressure rating limit my steering speed or range?

The 6.9 Mpa (1000 psi) relief valve caps peak system pressure, protecting seals and hoses while still allowing full lock-to-lock travel at normal operating loads.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.