VEVOR
VEVOR HBP1500II 2 HP Pool Pump 110/240V 110 GPM 59 ft Head
Circulates up to 110 GPM with a 59 ft head lift using a dual-voltage 2 HP copper motor
- TypeOther Appliances
- Width9.84
- 2 HP copper motor runs on 110V or 240V for flexible installation
- PP shell resists corrosion from pool chemicals for long service life
- 110 GPM maximum flow circulates up to 36,000 gallon pools quickly
- 59 ft maximum head lifts water to elevated spas or filters
- 3450 RPM single-speed operation with thermal protection prevents overheating
Versatile Voltage Pool Pump
The VEVOR HBP1500II is a 2 HP single-speed pump designed for above-ground pools, hot tubs and spas. It runs on either 110 V or 240 V at 60 Hz, making it adaptable to different household supplies. A copper motor with thermal protection drives the impeller at 3450 RPM for continuous water circulation.
Suitable Installations And Limits
This unit suits owners of above-ground pools up to 36,000 gallons who need a direct-replacement circulation pump with a 35.4 in power cord. It is not intended for in-ground installations that require higher head pressure, variable-speed control or permanent hard-wired electrical connections.
110 GPM Maximum Flow Rate
The pump delivers up to 110 GPM at a 59 ft maximum head, which determines whether it can turn over the pool volume within the desired cycle time. Check the system curve of your plumbing against this flow and head figure before purchasing.
Highlights
- 2 HP copper motor runs on 110V or 240V for flexible installation
- PP shell resists corrosion from pool chemicals for long service life
- 110 GPM maximum flow circulates up to 36,000 gallon pools quickly
- 59 ft maximum head lifts water to elevated spas or filters
- 3450 RPM single-speed operation with thermal protection prevents overheating
Specifications
| Type | Other Appliances |
|---|---|
| Width | 9.84 |
Questions about this item
What connectors and accessories come with the pump and what must I buy separately?
The box includes the pump, two internal-thread connectors, two sliding-joint connectors, PTFE tape and a user manual. Piping, valves and a 22-24 in sand filter are not included.
Should I choose the 110 V or 240 V setting for my installation?
The motor is dual-voltage and can be switched between AC 110 V and 240 V at 60 Hz; select the setting that matches your supply.
Will the 110 GPM flow rate be achieved in my plumbing?
110 GPM is the maximum free-flow figure; actual flow will be lower once pipe friction, fittings and a 22-24 in sand filter add resistance.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



