We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Thirteen flat aluminium gutter-guard strips, 48in long, 5in wide, 0.6in deep, 0.02in thick, 0.157in holes, silver finish

VEVOR

VEVOR Gutter Guard 5in 52ft 13PCS Aluminum 0.157in Hole 0.02in Thick

SKU CH-0NJ4-7SG1R

Aluminium gutter-guard kit covers 52 ft with 13 pieces, 0.157 in holes block debris while 0.02 in thick alloy resists rust

  • TypeOther Appliances
  • Width3.54
  • Prevents clogs with 0.157in mesh blocking leaves and debris
  • Durable aluminum alloy resists rust and corrosion in all weather
  • 52ft total coverage from 13 pieces at 48in each
  • DIY-cut panels fit any 5in gutter shape or length
  • Includes M4.8 tapping screws and bushings for secure installation

Gutter Guard 5in 52ft Aluminum

This VEVOR gutter guard kit supplies 13 aluminum pieces totalling 52 ft of coverage for standard 5-inch gutters. Each panel measures 48 in by 5 in and can be cut to suit any roof or gutter profile. The 0.157 in hole diameter blocks leaves, pine needles and roofing grit while letting water pass through. Homeowners seeking a DIY leaf filter that fits any gutter type will find the included hardware convenient.

Thermals Noise Power Draw

Aluminum construction resists rust and corrosion across all weather conditions without requiring powered components. The perforated mesh allows efficient water flow while preventing debris build-up that could cause overflow. Because the system is passive, it adds no electrical load and produces no operational noise. The 0.02 in thick alloy maintains structural rigidity under normal rain and wind exposure.

Sustained Load Behavior

Under continuous heavy rainfall the 0.157 in perforations sustain free drainage without clogging from fine grit or needles. The aluminum panels resist deformation over long seasonal cycles and do not become brittle in freezing temperatures. Secure mounting with the supplied M 4.8 x 13 tapping screws keeps each 48 in section firmly seated during prolonged storm events. The 7.05 lb total kit weight distributes evenly along the 52 ft run for consistent performance.

Highlights

  • Prevents clogs with 0.157in mesh blocking leaves and debris
  • Durable aluminum alloy resists rust and corrosion in all weather
  • 52ft total coverage from 13 pieces at 48in each
  • DIY-cut panels fit any 5in gutter shape or length
  • Includes M4.8 tapping screws and bushings for secure installation

Specifications

TypeOther Appliances
Width3.54

Questions about this item

How do you install the 48-inch aluminum panels on a 5-inch gutter and what step do people often skip?

Slide each 48-inch by 5-inch panel under the roof shingles and secure it to the gutter lip using the included M 4.8 x 13 hexagonal tapping screws; the step many miss is pre-drilling pilot holes so the 0.02-inch thick aluminum does not bend or strip the screw threads.

What maintenance will the aluminum mesh need after a few seasons?

The 0.157-inch hole mesh is made from rust-resistant aluminum alloy, so it only requires occasional rinsing with a garden hose to clear fine roofing grit that can settle in the perforations; no coating touch-ups or corrosion treatments are needed.

At what point does heavy rain overwhelm the 0.157-inch perforations?

During sustained downpours the 4-millimeter holes can pass only a finite volume of water; once rainfall intensity exceeds the mesh’s open-area flow rate, water will sheet over the front edge instead of draining through.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.