We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular black charger with LCD screen and cooling vents, clamps and terminals included

VEVOR

VEVOR GS450C 35A Smart Battery Charger 6V 12V 24V

SKU CH-GT69-WHD94

Charges 6V, 12V and 24V lead-acid and LiFePO4 batteries at up to 35A with automatic voltage detection, LCD display, desulfation mode and fan cooling

  • TypeOther Appliances
  • Charges 6 V, 12 V and 24 V batteries with automatic voltage detection
  • Delivers up to 35 A at 12 V for rapid charging of large banks
  • LCD display shows real-time voltage, current and charging status
  • Fan-cooled design operates reliably from -4 °F to 104 °F
  • Includes clamps, ring terminals and a 10 ft power cord for flexible connection

Smart 35-Amp multi-voltage charger

The VEVOR GS450C charges 6V, 12V and 24V lead-acid, AGM, gel, SLA and LiFePO4 batteries with selectable currents of 10A, 20A or 35A at 12V and 10A or 20A at 6V and 24V. An automatic mode detects the voltage and sets the appropriate rate. Low-voltage detection starts at 1V, 8V or 16V depending on the selected voltage. It suits owners of cars, motorcycles, boats, lawn mowers and deep-cycle systems who need one unit for several battery types.

Fan-cooled operation from -4°F to 104°F

A built-in fan provides active cooling while the charger runs on AC 100-240V at 50/60 Hz. The unit weighs 2.8 lbs and measures 7.9 x 4.5 x 2.12 in, so it sits on a bench or mounts in a workshop without special ventilation ducting. The 10 ft power cord reaches distant outlets. No figures for acoustic noise or idle power draw are supplied.

Bundled clamps, terminals and manual

The package includes battery clamps, two copper wire terminals and a figure-eight tail plug for the mains lead. These accessories let the user connect directly to posts or ring terminals without buying extra cables. The printed user manual explains mode selection and safety steps. No software, app or digital interface is mentioned.

Highlights

  • Charges 6 V, 12 V and 24 V batteries with automatic voltage detection
  • Delivers up to 35 A at 12 V for rapid charging of large banks
  • LCD display shows real-time voltage, current and charging status
  • Fan-cooled design operates reliably from -4 °F to 104 °F
  • Includes clamps, ring terminals and a 10 ft power cord for flexible connection

Specifications

TypeOther Appliances

Questions about this item

How do I connect the GS450C to a 12V AGM battery and which step is often missed?

Attach the red clamp to the positive terminal and the black clamp to the negative terminal, then plug the figure-eight power cord into AC 100-240V mains; the step often missed is selecting the 12V 20A or 35A charge rate before starting.

What part will need replacement after extended use on this charger?

The internal cooling fan is the only moving component; if airflow drops or noise increases, the fan assembly should be replaced to maintain the -4°F to 104°F operating range.

At what point does the 35A output taper off during a long charge session?

The charger reduces current automatically when the battery voltage approaches the absorption threshold for the selected 12V mode, preventing overcharge while the fan manages heat.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.