VEVOR
VEVOR Gas Pole Saw 43CC 2-Stroke 12 in Bar 7.1-12 ft Extendable Rotatable Head
A 43 cc 2-stroke gasoline engine drives a 12 in bar on an extendable pole that reaches 7.1 to 12 ft with a rotatable head
- TypeOther Appliances
- Width10.83
- Powerful 43 cc 2-stroke engine delivers 1.75 hp at 12,000 RPM for fast cutting
- Extends from 7.1 ft to 12 ft with two 33.7 in poles for high branches
- 90-180° rotatable head adjusts to multiple pruning angles without repositioning
- 30 fl.oz. fuel tank and 5.28 fl.oz. chain oil reservoir support long work sessions
- Lightweight 21.3 lbs alloy construction with shoulder strap reduces fatigue during extended use
43 cc 2-stroke pole saw for high branches
The VEVOR gas pole saw uses a 43 cc 2-stroke engine rated at 1.75 hp and a maximum speed of 12000 rpm. A 12 in guide bar with a 3/8LP, 39-link chain provides a maximum cutting diameter of 8 in. The rotatable head adjusts from 90 to 180 degrees for flexible pruning angles.
Extendable reach replaces ladders for many tasks
Two extension poles made from AL6063 alloy extend the total length from 7.1 ft to 12 ft, allowing ground-level access to higher limbs. The detachable rods reduce handling load, and the thickened vertical bar resists compression and bending. A shoulder strap and anti-slip grip help manage the 21.3 lb weight during extended use.
850 ml fuel tank and 150 ml oil reservoir support
The 30 fl. oz. fuel tank and independent 5.28 fl. oz. chain oil tank keep the saw running without frequent stops. The 12 in bar handles branches up to 8 in diameter, but the tool is not suited for felling large trunks or cutting diameters beyond that limit. The 2 mm pole wall thickness and alloy construction withstand typical outdoor conditions.
Highlights
- Powerful 43 cc 2-stroke engine delivers 1.75 hp at 12,000 RPM for fast cutting
- Extends from 7.1 ft to 12 ft with two 33.7 in poles for high branches
- 90-180° rotatable head adjusts to multiple pruning angles without repositioning
- 30 fl.oz. fuel tank and 5.28 fl.oz. chain oil reservoir support long work sessions
- Lightweight 21.3 lbs alloy construction with shoulder strap reduces fatigue during extended use
Specifications
| Type | Other Appliances |
|---|---|
| Width | 10.83 |
Questions about this item
How much storage height does the 7.1 ft collapsed pole saw need?
The collapsed unit measures 7.1 ft long by 8.9 in wide by 8.9 in high, so allow at least 8.9 in of vertical shelf space.
What is the correct fuel mix for the 43 cc 2-stroke engine and which tank gets filled first?
Mix fresh unleaded petrol with 2-stroke oil at the ratio shown in the manual, fill the 30 fl.oz. fuel tank, then fill the separate 5.28 fl.oz. chain-oil reservoir before starting.
When should the 3/8LP 39-link chain be sharpened or replaced on the 12 in guide bar?
Sharpen when cutters feel dull or produce fine dust instead of chips; replace the chain if any cutter is damaged, stretch exceeds the adjuster range, or after several sharpenings.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



